HP Vectra VEi8 HP Vectra VEi8, Service Handbook - Page 18
Attach the connectors to the new floppy drive and the hard disk
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Replacing the Floppy Drive 5 Undo the three screws on the sides of the drive tray and remove the old floppy drive. 6 Slide the new floppy drive into the drive tray (with the correct orientation) and tighten the screws. 7 Replace the drive tray and tighten the three retaining screws. 8 Attach the connectors to the new floppy drive and the hard disk drive. 9 Replace the cover (described in this chapter).
Replacing the Floppy Drive
5
Undo the three screws on the sides of the drive tray and remove the
old floppy drive.
6
Slide the new floppy drive into the drive tray (with the correct
orientation) and tighten the screws.
7
Replace the drive tray and tighten the three retaining screws.
8
Attach the connectors to the new floppy drive and the hard disk
drive.
9
Replace the cover (described in this chapter).