HP Vectra VEi8 HP Vectra VEi8, Service Handbook - Page 24

Replace the cover described in

Get HP Vectra VEi8 PDF manuals and user guides View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Replacing the System Board 5 Install the new system board. To do this, align the rear connectors on the new system board with the holes on the inside back panel. Lower the board onto the 2 location pins, then replace the screws that hold it in place. 6 Replace the main memory, processor and any accessory boards in the new system board (described in this chapter). Reconnect any cables you disconnected earlier and replace the drive tray. 7 Replace the cover (described in this chapter). NOTE If you change your processor or system board, you may need to update your BIOS. The latest BIOS for your PC and instructions on updating the BIOS are available from: www.hp.com/go/vectrasupport.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
Replacing the System Board
5
Install the new system board. To do this, align the rear connectors on
the new system board with the holes on the inside back panel. Lower
the board onto the 2 location pins, then replace the screws that hold
it in place.
6
Replace the main memory, processor and any accessory boards in
the new system board (described in this chapter). Reconnect any
cables you disconnected earlier and replace the drive tray.
7
Replace the cover (described in this chapter).
NOTE
If you change your processor or system board, you may need to update
your BIOS. The latest BIOS for your PC and instructions on updating the
BIOS are available from:
www.hp.com/go/vectrasupport
.