HP Vectra XE320 hp vectra xe320, troubleshooting guide - Page 34
Accessing Components in the PC, Removing and Replacing the Side Panel
![]() |
View all HP Vectra XE320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
If You Have a Problem Accessing Components in the PC This section provides basic information on accessing internal components in your PC. More detailed information is available in the HP Vectra XE320 Upgrade Guide, a PDF document that can be downloaded from the HP PC support website (www.hp.com/go/vectrasupport). Removing and Replacing the Side Panel WARNING For your safety, disconnect the power cord and all external cables. 1 Switch off the monitor and PC, disconnect all power cords and any telecommunication cables. 2 Place the PC on a flat surface and stand behind it. 3 Undo the thumb screws on the back of the PC, then slide back and lift off the side panel. thumb screws 4 Slide back and lift off the side panel. 5 To replace the side panel, engage the catches on both sides of the panel in the holes provided, then slide the panel back in place. Replace the thumb screws. 34 Troubleshooting Guide
![](/manual_guide/products/hewlettpackard-vectra-xe320-hp-vectra-xe320-troubleshooting-guide-f3a7503/34.png)