HP Workstation xw8000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 316
AFU Commands, Flashing the Firmware on All Controllers
View all HP Workstation xw8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
Adaptec SCSI RAID Software Reference Guide b Flashing the Firmware on Multiple Controllers To flash the firmware on multiple controllers, type the following at the DOS prompt, replacing the commaseparated list of CONTROLLER_NUMBER_n with the numbers of the controllers whose firmware you are updating: afu update /C CONTROLLER_NUMBER_1,CONTROLLER_NUMBER_2 To upgrade controllers 0, 2, and 3 for example, you would type the following: afu update /C 0, 2, 3 c Flashing the Firmware on All Controllers To flash the firmware on all controllers, type the following at the DOS prompt: afu update /C all 6 The firmware image may be contained on multiple diskettes. The AFU prompts you to put in the first firmware diskette. When it detects that the diskette is in the drive, the AFU will read the part of the firmware image contained on the first diskette. 7 The AFU then tells you to remove the first firmware diskette and insert the second firmware diskette. 8 If there are additional UFI files this process is repeated until the complete image has been read, then the controller flash will be updated with the new image. AFU Commands The following pages describe each of the AFU commands in detail. For ease of use, the commands are presented in alphabetical order. 12-8