HP Workstation xw8000 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 77
Total Size, Stripe Size, Usage, State, Unprot, Scsi C:ID:L, Partition Offset: Size
![]() |
View all HP Workstation xw8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
container Commands ■ The Type column displays RAID-5 to indicate that the newly created array is a RAID-5 set. ■ The Total Size column displays the total size of the freespace available. In this example, 40.0 MB of freespace was specified, which means that this column displays 30.0 MB as available. ■ The Stripe Size column displays the stripe size you specified as the stripe_size parameter, which in the example is 64 KB. ■ The Usage column displays None to indicate that the newly created RAID-5 set does not have a file system on it.To create an NTFS or FAT file system on an array, use the container format command. ■ The State column displays the state of an array, which in the example shows Unprot to indicate that the RAID-5 set is not yet redundant. This means that the command has not completed the creation of the RAID-5 set. If the container list command is executed after the RAID-5 set completes execution, the State column is blank. (Note that this column appears only if you specify the /full switch with the container list command.) ■ The Scsi C:ID:L column displays the SCSI device ID(s) for the disk(s) on which you created the RAID-5 set, which in the example are: 0:02:0, 0:03:0, 0:04:0, and 0:05:0. ■ The Partition Offset: Size column displays the partition offset(s) and size(s) of the newly created RAID-5 set, which in the example is 64.0 KB and 10.0 MB respectively. Related Information container commands: ■ container list (page 5-54) ■ container set cache (page 5-97) ■ container set label (page 5-108) 5-29
![](/manual_guide/products/hewlettpackard-xw8200-adaptec-scsi-raid-2120s-software-reference-guide-ea1ed4a/77.png)