HP XM600 hp kayak xm600 series 2, troubleshooting guide for minitower models - Page 15

Case 4 — Boot Process Fails and Error Message Displayed on Screen, Error Message Utility (EMU)

Get HP XM600 - Kayak - 128 MB RAM PDF manuals and user guides View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Your PC Workstation Does Not Start Correctly Case 4 - Boot Process Fails and Error Message Displayed on Screen Case 4 - Boot Process Fails and Error Message Displayed on Screen When the power button is pressed, the PC Workstation starts to boot and there is activity on the monitor, but the boot process then fails with an error message. Status LED is red. A configuration error has been detected. • Boot process fails with an error message. • Status LED is RED. • MaxiLife status panel displays and a POST error message. NOTE Before removing the cover, switch off the display and PC Workstation. Disconnect the power cord and any accessory cables. When checks have been completed, close the PC Workstation and reconnect the power cord and accessory cables. Verify that the PC Workstation boots correctly. Error Message Utility (EMU) In the event of an error generated in POST (Power-On-Self-Test) during the boot process, there are two beeps, then the Error Setup Manager gives access to one or more detected errors. Each EMU error is displayed as a 4-digit code with an associated text message on the monitor screen and the MaxiLife LCD panel. NOTE If the monitor is not available, a short error message is also displayed on the MaxiLife LCD panel. Further details can be accessed by pressing ENTER. A detailed description of the reason for the failure and how to solve the problem is displayed. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
15
Your PC Workstation Does Not Start Correctly
Case 4 — Boot Process Fails and Error Message Displayed on Screen
Case 4 — Boot Process Fails and Error Message
Displayed on Screen
When the power button is pressed, the PC Workstation starts to boot
and there is activity on the monitor, but the boot process then fails with
an error message. Status LED is red. A configuration error has been
detected.
•
Boot process fails with an error message.
•
Status LED is
R
ED
.
•
MaxiLife status panel displays
and a POST error message.
NOTE
Before removing the cover, switch off the display and PC Workstation. Disconnect the
power cord and any accessory cables. When checks have been completed, close the PC
Workstation and reconnect the power cord and accessory cables. Verify that the PC
Workstation boots correctly.
Error Message Utility (EMU)
In the event of an error generated in POST (Power-On-Self-Test)
during the boot process, there are two beeps, then the Error Setup
Manager gives access to one or more detected errors. Each EMU error
is displayed as a 4-digit code with an associated text message on the
monitor screen and the MaxiLife LCD panel.
NOTE
If the monitor is not available, a short error message is also displayed on the MaxiLife
LCD panel.
Further details can be accessed by pressing ENTER. A detailed
description of the reason for the failure and how to solve the problem is
displayed.