HP XM600 hp kayak xm600 series 2, troubleshooting guide for minitower models - Page 31
Clearing the CMOS, Switch on the PC Workstation. Run
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Configuration Problems Troubleshooting BIOS Problems Clearing the CMOS 1 Turn off the PC Workstation, disconnect the power cord and data cables, then remove the cover. 2 Set the system board switch 8 to the ON position to clear the CMOS memory. 3 Replace the cover, and only reconnect the power cord. 4 Reboot the PC Workstation. A message similar to the following will be displayed: "Configuration has been cleared, set switch Clear to the ON position before rebooting." 5 Turn off the PC Workstation, disconnect the power cord, and remove the cover. 6 Set the system board switch 8 to the OFF position to retain the configuration. 7 Replace the cover, and reconnect the power cord and data cables. 8 Switch on the PC Workstation. Run the Setup program by pressing F2. Then press F9, the CMOS default values will be automatically downloaded and saved. 9 Press Esc to save the configuration and exit from the Setup program. 31