HP Xw6400 HP xw Workstation series - Sliding rack mount kit installation - Page 7
Installing on round hole and square hole racks, Release rear bracket if it must be repositioned 3.
UPC - 882780645493
View all HP Xw6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installing on round hole and square hole racks These instructions apply to racks such as standard HP racks. NOTE: This product must be mounted in the middle of a 4U space. Use the Mounting Aid at the end of this document to determine a 4U space and mark the center. 1. Engage the three pins on the rear slide mounting bracket in the holes in the rear rack column, and slide forward to lock in place (1). 2. Engage the three pins on the front slide mounting bracket in the holes in the front rack column, and slide backward to lock in place (2). NOTE: The slide telescopes to accomplish this task. Repeat this procedure for the second slide. 3. Release rear bracket if it must be repositioned (3). 4. Release front bracket if it must be repositioned (4). Figure 4 Installing on round/square hole racks 5. Continue with Step 4-Mounting into a rack. ENWW Step 3-Installing rails to the rack 7