HP Xw6400 HP xw Workstation series - Sliding rack mount kit installation - Page 8
Installing on threaded hole racks
![]() |
UPC - 882780645493
View all HP Xw6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installing on threaded hole racks NOTE: This product must be mounted in the middle of a 4U space. Use the template in Mounting Aid in this document to determine a 4U space and mark the center. 1. Remove the three pins from the rear slide mounting bracket using a flat blade screwdriver (1). 2. Remove the three pins and two nuts from the front slide mounting bracket (2). 3. Attach the rear slide mounting bracket to the rear rack column using screws provided by your rack manufacturer (3). 4. Attach the front slide mounting bracket to the front rack column using screws provided by your rack manufacturer (4). 5. Adjust the rear slide (5) if necessary. Refer to Step 3 for details. Figure 5 Installing on threaded hole racks 6. Continue with Step 4-Mounting into a rack. 8 Sliding rack mount kit installation ENWW
![](/manual_guide/products/hewlettpackard-xw6600-hp-xw-workstation-series-sliding-rack-mount-kit-installation-f8be08e/8.png)