HP Z600 HP 22-in-1 Media Card Reader Installation - Page 7
Troubleshooting - memory expansion
UPC - 884962074053
View all HP Z600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Slot ID Media ● CompactFlash Card Type I ● CompactFlash Card Type II ● MicroDrive ● Memory Stick (MS) ● MagicGate Memory Stick (MG) ● MagicGate Memory Stick Duo ● Memory Stick Select ● Memory Stick Duo (MS Duo) ● Memory Stick PRO (MS PRO) ● Memory Stick PRO Duo (MS PRO Duo) ● Memory Stick PRO-HG Duo ● Memory Stick Micro (M2) (adapter required) Compatible media cards For a list of supported USB media cards for the HP 22-in-1 (USB) Media Card Reader, see the "Compatible Media Cards" document available on the CD included with this kit. NOTE: The HP 22-in-1 (USB) Media Card Reader is not compatible with 1394 devices. Troubleshooting Solving common problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Table 1 Solving Common Problems Problem Possible Cause Solution USB connector is not available on the system board. All USB ports on the computer Purchase and install a USB expansion card that is are used or none are appropriate for your system. available. Media card does not work in a digital camera after formatting it in Microsoft® Windows® XP. By default, Windows XP formats any media card with a capacity greater than 32 MB with the FAT32 format. Most digital cameras use the FAT (FAT16 and FAT12) format and cannot operate with a FAT32 formatted card. Either format the media card in the digital camera or select FAT file system to format the media card in a computer with Windows XP. A write-protected or locked error occurs when attempting to write to the media card. Media card is locked. Locking the media card is a safety feature that prevents writing to and deleting from an SD/ Memory Stick/PRO card. If using an SD card, make sure that the lock tab located on the right of the SD card is not in the locked position. If using a Memory Stick/PRO card, make sure that the lock tab located on the bottom of the Memory Stick/PRO card is not in the locked position. ENWW Troubleshooting 7