Section |
Page |
Getting Started Guide |
1 |
Getting Started Guide |
1 |
Getting Started Guide |
1 |
HP B2600 Workstations |
1 |
Printed in USA |
1 |
Manufacturing Part Number: A6070-90000 |
1 |
Edition E0501 |
1 |
© Copyright 2001 |
1 |
© Copyright 2001 |
1 |
Hewlett-Packard Company |
1 |
Notice |
2 |
Notice |
2 |
1. HP warrants HP hardware, accessories and supplies against defects in materials and workmanship... |
2 |
1. HP warrants HP hardware, accessories and supplies against defects in materials and workmanship... |
2 |
2. HP warrants that HP software will not fail to execute its programming instructions, for the pe... |
2 |
3. HP does not warrant that the operation of HP products will be uninterrupted or error free. If ... |
3 |
4. HP products may contain remanufactured parts equivalent to new in performance or may have been... |
3 |
5. The warranty period begins on the date of delivery or on the date of installation if installed... |
3 |
6. Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or ca... |
3 |
7. TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER WARRANTY O... |
3 |
8. HP will be liable for damage to tangible property per incident up to the greater of $300,000 o... |
3 |
9. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE CUSTOMERS’ SOL... |
3 |
Preface |
7 |
Preface |
7 |
Safety and Regulatory Statements |
7 |
Safety and Regulatory Statements |
7 |
Installation Notice |
8 |
Installation Notice |
8 |
Related Manuals |
8 |
Related Manuals |
8 |
• Common Desktop Environment (CDE) User’s Guide |
8 |
• Common Desktop Environment (CDE) User’s Guide |
8 |
• Configuring HP-UX for Peripherals |
8 |
• Configuring HP-UX for Peripherals |
8 |
• HP-UX System Administration Tasks |
8 |
• HP CDE Getting Started Guide |
8 |
• Managing Systems and Workgroups |
8 |
• Using HP-UX. |
8 |
• Technical Reference for the B2600 |
8 |
Revision History |
9 |
Revision History |
9 |
Edition |
9 |
Edition |
9 |
Edition |
9 |
Revision History |
9 |
E0501 |
9 |
E0501 |
9 |
First Printing |
9 |
Problems, Questions, and Suggestions |
9 |
Problems, Questions, and Suggestions |
9 |
Documentation Conventions |
10 |
Documentation Conventions |
10 |
<TABLE> |
10 |
<TABLE BODY> |
10 |
<TABLE ROW> |
10 |
user-supplied values |
10 |
Italic words or characters in syntax and command descriptions represent values that you must supp... |
10 |
<TABLE ROW> |
10 |
screen display |
10 |
Information that the system displays, commands that you must use literally, and path names appear... |
10 |
<TABLE ROW> |
10 |
Enter |
10 |
Keycaps are presented with a special keycap font as shown in the left column. (In this document, ... |
10 |
Electrostatic Discharge (ESD) Precautions |
10 |
Electrostatic Discharge (ESD) Precautions |
10 |
ESD (electrostatic discharge) |
10 |
Electrostatic discharge (ESD) |
10 |
• Work on a static-free mat. |
10 |
• Work on a static-free mat. |
10 |
• Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your... |
10 |
• Create a common ground for the equipment you are working on by connecting the static-free mat, ... |
10 |
• Keep uninstalled printed circuit boards in their protective antistatic bags. |
10 |
• Handle printed circuit boards by their edges, once you have removed them from their protective ... |
10 |
1 System Overview |
11 |
1 System Overview |
11 |
• Hardware System Overview |
12 |
• Hardware System Overview |
12 |
• Operating System Overview |
12 |
• Your Workstation’s Front and Rear Panels |
12 |
• Monitors |
12 |
• Workstation Characteristics |
12 |
• Working In Comfort and Safety Checklist |
12 |
Hardware System Overview |
13 |
Hardware System Overview |
13 |
Hardware system features |
13 |
HP B2600 features |
13 |
<TABLE> |
13 |
Table 11 HP B2600 Hardware System Features |
13 |
<TABLE HEADING> |
13 |
<TABLE ROW> |
13 |
Workstation Feature |
13 |
Description |
13 |
<TABLE BODY> |
13 |
<TABLE ROW> |
13 |
Processor |
13 |
A PA8600 microprocessor with an operating frequency of 500MHz. This processor has a 0.5 MB instru... |
13 |
<TABLE ROW> |
13 |
Monitors |
13 |
PC compatible monitors |
13 |
<TABLE ROW> |
13 |
Optional Graphics |
13 |
Supported graphics devices: |
13 |
• HP Visualize-fx5 |
13 |
• HP Visualize-fx5 |
13 |
• HP Visualize- |
13 |
<TABLE ROW> |
13 |
Main Memory |
13 |
Four memory slots (cards can be mixed): |
13 |
• 256MB DIMMs |
13 |
• 256MB DIMMs |
13 |
• 512MB DIMMs |
13 |
• 1GB DIMMs |
13 |
<TABLE ROW> |
13 |
Internal Storage Devices |
13 |
Two Low-Voltage Differential (LVD) SCSI hard disk drives (one standard and one optional) and one ... |
13 |
<TABLE ROW> |
13 |
Standard Network |
13 |
10/100 Base T LAN connector |
13 |
<TABLE ROW> |
13 |
Standard I/O Connectors |
13 |
Standard workstation I/O ports: |
13 |
Universal serial bus (USB) |
13 |
Universal serial bus (USB) |
13 |
Universal serial bus (USB) |
13 |
Serial ports 1 and 2 connectors |
13 |
Serial ports 1 and 2 connectors |
13 |
• Parallel connector |
13 |
• LAN connector |
13 |
<TABLE ROW> |
14 |
PCI slots |
14 |
Peripheral component interconnect (PCI) slots |
14 |
Slot 1: 32 Bit, 5.0V, 33MHz |
14 |
<TABLE ROW> |
14 |
Remote Power-on |
14 |
Remote power-on |
14 |
Allows you to turn on your workstation from a remote system via an RS-232C port. |
14 |
Operating System Overview |
15 |
Operating System Overview |
15 |
Instant ignition |
15 |
Operating system overview |
15 |
System overview, operating |
15 |
Your Workstation’s Front and Rear Panels |
16 |
Your Workstation’s Front and Rear Panels |
16 |
Front panel |
16 |
Figure 11 System Unit Front Panel |
16 |
Figure 11 System Unit Front Panel |
16 |
<GRAPHIC> |
16 |
Figure 12 System Unit Rear Panel Connectors |
16 |
<GRAPHIC> |
17 |
Monitors |
17 |
Monitors |
17 |
Locking Your Workstation |
18 |
Locking Your Workstation |
18 |
Installing Your Workstation’s Security Lock |
18 |
Installing Your Workstation’s Security Lock |
18 |
1. Remove your workstation’s bezel by press in on the buttons located on both sides of the bezel.... |
18 |
1. Remove your workstation’s bezel by press in on the buttons located on both sides of the bezel.... |
18 |
Figure 13 Removing Your Workstation’s Bezel |
18 |
Figure 13 Removing Your Workstation’s Bezel |
18 |
<GRAPHIC> |
19 |
Figure 14 Locating Your Security Lock and Key |
19 |
Figure 14 Locating Your Security Lock and Key |
19 |
<GRAPHIC> |
19 |
Figure 15 Install Your Security Lock |
19 |
Figure 15 Install Your Security Lock |
19 |
<GRAPHIC> |
19 |
Workstation Characteristics |
20 |
Workstation Characteristics |
20 |
<TABLE> |
20 |
Table 12 Workstation Characteristics |
20 |
<TABLE HEADING> |
20 |
<TABLE ROW> |
20 |
Characteristic |
20 |
Description |
20 |
<TABLE BODY> |
20 |
<TABLE ROW> |
20 |
Weight Rack System (excl. keyboard and display) Weight Desk-side System (excl. keyboard and display) |
20 |
14.07 kg (31.0 lb.) 15.89 kg (35.0 lb.) |
20 |
<TABLE ROW> |
20 |
Dimensions Rack System |
20 |
Depth: 45.77 cm (18.02 inches) Width: 42.50 cm (16.73 inches) Height: 12.70 cm (5.00 inches) |
20 |
<TABLE ROW> |
20 |
Dimensions Desk-side System |
20 |
Depth: 47.02 cm (18.51 inches) Width: 43.26 cm (17.03 inches) Height: 13.67 cm (5.38 inches) |
20 |
<TABLE ROW> |
20 |
Storage temperature |
20 |
-40C to +70C (-40F to +158F) |
20 |
<TABLE ROW> |
20 |
Storage humidity |
20 |
8% to 90% (relative) |
20 |
<TABLE ROW> |
20 |
Operating temperature |
20 |
+5C to +35C (+41F to +95F) |
20 |
<TABLE ROW> |
20 |
Operating humidity |
20 |
15% to 80% (relative) |
20 |
<TABLE ROW> |
20 |
Input Current |
20 |
6.2 to 7.4 amps (AC at 100 to 120 Vac) 3.2 to 3.7 amps (AC at 200 to 230 Vac) |
20 |
<TABLE ROW> |
20 |
Input Frequency |
20 |
47 to 66 Hz |
20 |
<TABLE ROW> |
20 |
Sound Power Rack System |
20 |
5.5 Bels LwA max. at 30C (88F) |
20 |
<TABLE ROW> |
20 |
Sound Power Desk-side System |
20 |
5.0 Bels LwA max. at 30C (88F) |
20 |
Working In Comfort and Safety Checklist |
21 |
Working In Comfort and Safety Checklist |
21 |
Preparing Your Work Environment |
21 |
Preparing Your Work Environment |
21 |
• Work Surface Height |
21 |
• Work Surface Height |
21 |
• Work Surface Height |
21 |
• Chair |
21 |
• Chair |
21 |
• Monitor |
21 |
• Monitor |
21 |
• Work Surface Arrangement |
21 |
• Work Surface Arrangement |
21 |
CAUTION Various aspects of using mice, keyboards and other input devices may increase your risk o... |
22 |
Your Work Posture |
22 |
Your Work Posture |
22 |
• Head |
22 |
• Head |
22 |
• Head |
22 |
• Back |
22 |
• Back |
22 |
• Arms |
22 |
• Arms |
22 |
• Hands, Wrists, Forearms |
22 |
• Hands, Wrists, Forearms |
22 |
• Legs |
22 |
• Legs |
22 |
• Feet |
23 |
• Feet |
23 |
Additional Ergonomic Issues |
23 |
Additional Ergonomic Issues |
23 |
• Look away from the screen from time-to-time to help reduce eyestrain. Focus on distant objects ... |
23 |
• Look away from the screen from time-to-time to help reduce eyestrain. Focus on distant objects ... |
23 |
• Remember to occasionally shift position and move your body. Keeping your body in one position f... |
23 |
• Changing tasks frequently will help prevent muscle stiffness. Examples: alternating between key... |
23 |
• Discomfort may be alleviated by using alternative ergonomic designs and accessories such as erg... |
23 |
Using Your Audio Card (Optional) |
24 |
Using Your Audio Card (Optional) |
24 |
• Audio Card Connections |
24 |
• Audio Card Connections |
24 |
• Audio Control |
24 |
• Using the xmcd Utility |
24 |
• Beep Control |
24 |
NOTE The audio card is supported only in slot 1 of the PCI cage. |
24 |
Audio Card Connections |
24 |
Audio Card Connections |
24 |
Figure 17 Audio Card Connections |
24 |
Figure 17 Audio Card Connections |
24 |
<GRAPHIC> |
25 |
Table 13 Description of Audio Card Connections |
25 |
<TABLE HEADING> |
25 |
<TABLE ROW> |
25 |
Connection |
25 |
Description |
25 |
<TABLE BODY> |
25 |
<TABLE ROW> |
25 |
DB-15 Connector |
25 |
Connection is non-functional. |
25 |
<TABLE ROW> |
25 |
Line Out |
25 |
Provides audio output for you headphones and speakers. |
25 |
<TABLE ROW> |
25 |
Microphone |
25 |
Provides voice input for a microphone. |
25 |
<TABLE ROW> |
25 |
Line In |
25 |
Provides audio input for playback and recording. |
25 |
Audio Control |
25 |
Audio Control |
25 |
1. Click on the Audio icon located on your HP CDE tool bar. This turns on the audio control capab... |
25 |
1. Click on the Audio icon located on your HP CDE tool bar. This turns on the audio control capab... |
25 |
2. Select the necessary external devices in the |
26 |
<TABLE> |
26 |
Table 14 Audio Control Panel Menus and Buttons |
26 |
<TABLE HEADING> |
26 |
<TABLE ROW> |
26 |
Menu/Button |
26 |
Description |
26 |
<TABLE BODY> |
26 |
<TABLE ROW> |
26 |
File > Close |
26 |
File > Close |
26 |
When selected this menu item closes the Audio Control Panel and saves the settings. |
26 |
<TABLE ROW> |
26 |
Outputs > Speaker |
26 |
Outputs > Speaker |
26 |
Enables the external speakers that are connected to your audio card in the line out jack. |
26 |
<TABLE ROW> |
26 |
Outputs > Headphones |
26 |
Outputs > Headphones |
26 |
Enables the headphones that are connected to your audio cards’s line out jack. |
26 |
<TABLE ROW> |
26 |
Outputs > Line Out |
26 |
Outputs > Line Out |
26 |
Enables the line out jack for external output devices that expect ‘line” level inputs (for exampl... |
26 |
<TABLE ROW> |
26 |
Help |
26 |
Help |
26 |
Provides information about the various features of the Audio Control Panel. |
26 |
<TABLE ROW> |
26 |
Output Volume |
26 |
Output Volume |
26 |
Allows you to change the softness or loudness of your audio signal. |
26 |
<TABLE ROW> |
26 |
Stop |
26 |
Stop |
26 |
Stops audio playback. |
26 |
<TABLE ROW> |
27 |
Monitoring |
27 |
Monitoring |
27 |
Allows you to listen to the external devices when it is selected. |
27 |
Using the xmcd Utility |
27 |
Using the xmcd Utility |
27 |
Installing the xmcd Utility |
27 |
Installing the xmcd Utility |
27 |
1. Log in as root. |
27 |
1. Log in as root. |
27 |
2. Type the previously given URL into the entry box on your web browser and press Enter. |
27 |
3. Select the menu item labeled |
27 |
4. Scroll down to the section |
27 |
5. Wait for a few seconds for the |
27 |
6. Follow the instructions in the section “Instructions to unpack xmcd binary” found on this |
28 |
Using the xmcd Utility |
28 |
Using the xmcd Utility |
28 |
1. Insert the audio CD into the CD drive. |
28 |
1. Insert the audio CD into the CD drive. |
28 |
2. Insert the headphone or speaker plug into the Line Out jack located on the back of your system... |
28 |
3. Complete the procedure in the section “Audio Control.“ |
28 |
4. Start the utility by typing xmcd at the prompt and pressing Enter. |
28 |
NOTE If the front of your CD drive has a volume control knob and headphone jack, you do not need ... |
29 |
Beep Control |
29 |
Beep Control |
29 |
<GRAPHIC> |
29 |
<GRAPHIC> |
30 |
<GRAPHIC> |
30 |
1. Select the |
30 |
1. Select the |
30 |
<GRAPHIC> |
30 |
CAUTION The default volume of 50% is very loud, so you might desire to adjust it to a more reason... |
30 |
3. Slide the Tone Slide Control to the value you desire. The scale ranges from 82Hz to 9000Hz. |
31 |
4. Slide the Duration Slide Control to the value you desire. The scale ranges from 0.1 seconds to... |
31 |
5. Select the |
31 |
2 Getting Your System Running |
33 |
2 Getting Your System Running |
33 |
• Information You Need to Record |
34 |
• Information You Need to Record |
34 |
• Powering Up Your System |
34 |
• Using Your CD Drive |
34 |
NOTE Be sure you have read and understand the information on mounting and unmounting CDs found in... |
34 |
NOTE This chapter requires you to be superuser ( |
34 |
Information You Need to Record |
35 |
Information You Need to Record |
35 |
LAN station ID |
35 |
Internet protocol (IP) address |
35 |
• Host name |
35 |
• Host name |
35 |
• Internet Protocol (IP) address |
35 |
• Time zone |
35 |
• Optional network parameters |
35 |
• Optional font server parameters |
35 |
<TABLE> |
35 |
Table 21 System Information You Need |
35 |
<TABLE HEADING> |
35 |
<TABLE ROW> |
35 |
Information You Need |
35 |
Record it here... |
35 |
Where to find it... |
35 |
<TABLE BODY> |
35 |
<TABLE ROW> |
35 |
Host Name |
35 |
This is the system name (for example, hpxxyyzz, hpssttuu). |
35 |
<TABLE ROW> |
35 |
Internet Protocol (IP) Address |
35 |
Ask the network or system administrator. |
35 |
<TABLE ROW> |
35 |
Time Zone |
35 |
The time zone where the workstation is located (e.g., MST). |
35 |
<TABLE ROW> |
35 |
Optional network parameters: |
35 |
Subnetwork mask |
35 |
Subnetwork mask |
35 |
Subnetwork mask |
35 |
Mask, subnetwork |
35 |
Network gateway IP address |
35 |
Local domain name |
35 |
DNS server host name |
35 |
DNS server IP address |
35 |
Network Information Service domain name |
35 |
________________ |
35 |
________________ |
35 |
________________ |
35 |
________________ |
35 |
________________ |
35 |
________________ |
35 |
________________ |
35 |
________________ |
35 |
Ask your network or system administrator. |
35 |
<TABLE ROW> |
35 |
Optional font parameters: |
35 |
Font server name |
35 |
Font server name |
35 |
Font server IP address |
35 |
________________ |
35 |
________________ |
35 |
________________ |
35 |
________________ |
35 |
Ask your network or system administrator. |
35 |
Powering Up Your System |
36 |
Powering Up Your System |
36 |
• Your workstation has been “ignited;” that is, the HP’s Instant Ignition process has installed t... |
36 |
• Your workstation has been “ignited;” that is, the HP’s Instant Ignition process has installed t... |
36 |
• Your workstation has not been “ignited;” that is, HP’s Instant Ignition process has not install... |
36 |
Turning on the Power |
37 |
Turning on the Power |
37 |
1. Turn on the monitor and any external peripherals (for example, printers) connected to the work... |
37 |
1. Turn on the monitor and any external peripherals (for example, printers) connected to the work... |
37 |
2. Turn on the workstation. The workstation will run a series of self-tests. If you are using an ... |
37 |
3. After two or three minutes, a series of messages are displayed as various hardware and softwar... |
37 |
4. A series of windows appears requesting the information you gathered in |
37 |
NOTE You should enter the host name when requested; otherwise, you will get an error message when... |
37 |
5. You are now asked if you want to set a root password. Specify the root password now. The root ... |
37 |
6. When you have finished answering all of the questions, the workstation completes its start-up ... |
37 |
7. Log into your first CDE session as |
38 |
NOTE You must log into the first session as |
38 |
8. Use the |
38 |
a. Move the mouse pointer to the |
38 |
a. Move the mouse pointer to the |
38 |
<GRAPHIC> |
38 |
<GRAPHIC> |
39 |
<GRAPHIC> |
39 |
<GRAPHIC> |
39 |
Documentation |
39 |
Using Your CD Drive (Optional) |
40 |
Using Your CD Drive (Optional) |
40 |
Mounting and Unmounting a CD |
40 |
Mounting and Unmounting a CD |
40 |
CD-ROM, mounting and unmounting |
40 |
Mounting a CD Using SAM |
40 |
Mounting a CD Using SAM |
40 |
Mounting, CD-ROM |
40 |
1. Log in as |
40 |
1. Log in as |
40 |
2. Move the mouse pointer to the Application Manager control for tools and click the left mouse b... |
40 |
<GRAPHIC> |
41 |
<GRAPHIC> |
41 |
<GRAPHIC> |
41 |
5. Double click on the Disks and File Systems icon. |
42 |
<GRAPHIC> |
42 |
<GRAPHIC> |
42 |
7. Click on Add in the Actions menu. For this example you will select the item Not Using the Logi... |
42 |
8. Enter the mount directory name (for example, /CD) in the Mount Directory field of the Add Disk... |
42 |
9. Click on the Modify Defaults... button. In the Modify Defaults window, select the Read Only it... |
42 |
10. Click on the OK button in the Add Disk without LVM window. It will take a short time for the ... |
42 |
Unmounting a CD Using SAM |
43 |
Unmounting a CD Using SAM |
43 |
Unmounting, CD-ROM |
43 |
NOTE Before you unmount a CD, make sure that your working directory is on some other disk or medium. |
43 |
1. Repeat steps one through five of the section “Mounting a CD Using SAM.” |
43 |
1. Repeat steps one through five of the section “Mounting a CD Using SAM.” |
43 |
2. Double click on the Disk Devices icon. |
43 |
<GRAPHIC> |
43 |
3. Click on Remove in the Actions menu. Click |
43 |
Verifying the CD Drive Operation |
44 |
Verifying the CD Drive Operation |
44 |
Verifying, CD drive |
44 |
CD drive, verifying |
44 |
1. Log in as |
44 |
1. Log in as |
44 |
2. Type the following command at the shell prompt and press Enter: /usr/sbin/ioscan -d sdisk |
44 |
H/W Path Class Description =============================================== 10/0/1... |
44 |
Configuring the CD Driver |
44 |
Configuring the CD Driver |
44 |
• Managing Systems and Workgroups |
44 |
• Managing Systems and Workgroups |
44 |
• Using HP-UX |
44 |
3 Troubleshooting Your System |
45 |
3 Troubleshooting Your System |
45 |
• Opening Your Workstation |
46 |
• Opening Your Workstation |
46 |
• Common Problems and Solutions |
46 |
• Dealing with a Boot Failure |
46 |
• Memory Failures |
46 |
• Using the LCD for Troubleshooting |
46 |
• Troubleshooting Monitor Problems |
46 |
• Running System Verification Tests. |
46 |
NOTE This chapter requires you to log in as |
46 |
Opening Your Workstation |
47 |
Opening Your Workstation |
47 |
NOTE If you have to remove the B2600 cover to implement a solution, replace the cover before test... |
47 |
1. Turn your workstation off and unplug it. |
47 |
1. Turn your workstation off and unplug it. |
47 |
2. Lay your workstation on a soft anti-static surface with the HP logo text in the upright positi... |
47 |
3. Push in the release buttons on both ends of the bezel and pull outward from the workstation to... |
47 |
4. Unscrew the captive screws. See |
47 |
5. Pull forward on the cover and lift it off the workstation. |
47 |
Figure 31 Front Bezel and Cover Removal |
47 |
Figure 31 Front Bezel and Cover Removal |
47 |
<GRAPHIC> |
48 |
Figure 32 Top View of the Workstation Components |
48 |
<GRAPHIC> |
49 |
Common Problems and Solutions |
49 |
<TABLE> |
49 |
Table 31 Problems Powering Up the System |
49 |
<TABLE HEADING> |
49 |
<TABLE ROW> |
49 |
Problem |
49 |
Solution |
49 |
<TABLE BODY> |
49 |
<TABLE ROW> |
49 |
The LCD does not light up. |
49 |
Make sure your AC power cord is connected securely to the system. Make sure the power cord is plu... |
49 |
<TABLE ROW> |
49 |
The LCD lights up, but is blank. |
49 |
Make sure the LCD control cable is properly connected inside the system unit. |
49 |
<TABLE ROW> |
49 |
The LCD light is on and a row of boxes appears |
49 |
Contact your local HP Support Representative. |
49 |
<TABLE ROW> |
49 |
LCD displays an error message. |
49 |
See the section “Using the LCD for Troubleshooting” later in this chapter. |
49 |
<TABLE ROW> |
49 |
If problems persist, contact your system administrator or call your designated service representa... |
49 |
<TABLE> |
50 |
Table 32 Problems Loading and Booting the Operating System |
50 |
<TABLE HEADING> |
50 |
<TABLE ROW> |
50 |
Problem |
50 |
Solution |
50 |
<TABLE BODY> |
50 |
<TABLE ROW> |
50 |
The LCD is lit, and text appears on the screen, but more than two minutes have passed with no sig... |
50 |
Make sure that the system is not in soft power off mode by pressing on the power switch located o... |
50 |
<TABLE ROW> |
50 |
The system stops or hangs while booting. |
50 |
Follow the instructions in “Dealing with a Boot Failure” later in this chapter. If the LCD displa... |
50 |
<TABLE ROW> |
50 |
If problems persist, contact your system administrator or call your designated service representa... |
50 |
<TABLE> |
50 |
Table 33 Problems with the 10/100 Base T Network |
50 |
<TABLE HEADING> |
50 |
<TABLE ROW> |
50 |
Problem |
50 |
Solution |
50 |
<TABLE BODY> |
50 |
<TABLE ROW> |
50 |
Cannot reach other systems on the network and applications that rely on the network will not run. |
50 |
Check the network connector on the back of the system unit. Make sure the network cable or transc... |
50 |
<TABLE ROW> |
50 |
If problems persist, contact your system administrator or call your designated service representa... |
50 |
<TABLE> |
51 |
Table 34 Problems Using a Hard Disk Drive |
51 |
<TABLE HEADING> |
51 |
<TABLE ROW> |
51 |
Problem |
51 |
Solution |
51 |
<TABLE BODY> |
51 |
<TABLE ROW> |
51 |
The disk drive is not accessible or does not respond. |
51 |
Make sure the internal disk drive(s) is properly seated. Make sure that all external SCSI devices... |
51 |
<TABLE ROW> |
51 |
If problems persist, contact your system administrator or call your designated service representa... |
51 |
<TABLE> |
51 |
Table 35 Problems Using the CD Drive |
51 |
<TABLE HEADING> |
51 |
<TABLE ROW> |
51 |
Problem |
51 |
Solution |
51 |
<TABLE BODY> |
51 |
<TABLE ROW> |
51 |
The CD drive does not respond to commands (for example, mount or swinstall). |
51 |
Re-enter the commands and make sure you have typed them correctly. See the section “Running Syste... |
51 |
<TABLE ROW> |
51 |
If problems persist, contact your system administrator or call your designated service representa... |
51 |
Dealing with a Boot Failure |
52 |
Dealing with a Boot Failure |
52 |
Boot failure |
52 |
NOTE A common cause of boot failures is forgetting to connect your SCSI terminator to the connect... |
52 |
NOTE Your computer automatically shuts down the operating system before it terminates the power. |
52 |
1. Power on your computer after your system has completely shut down. If |
52 |
1. Power on your computer after your system has completely shut down. If |
52 |
2. Press a key. You will then see the message: |
53 |
3. At the |
53 |
4. Boot from one of the listed devices by typing the following at the prompt and press |
53 |
5. Answer “ |
53 |
6. If your computer still fails to boot, there is either something wrong with the file system or ... |
53 |
Memory Failures |
54 |
Memory Failures |
54 |
Memory failures |
54 |
Using the LCD for Troubleshooting |
55 |
Using the LCD for Troubleshooting |
55 |
Liquid crystal display (LCD) |
55 |
|
55 |
|
55 |
|
55 |
A hardware error has been detected |
55 |
|
55 |
|
55 |
Hardware being tested |
55 |
|
55 |
|
55 |
Hardware being initialized |
55 |
|
55 |
|
55 |
System being shutdown |
55 |
|
55 |
|
55 |
A non-optimal or unusual operating condition exists |
55 |
|
55 |
|
55 |
Computer is running operating system |
55 |
<GRAPHIC> |
55 |
|
55 |
|
55 |
|
55 |
Three character mnemonic |
55 |
|
55 |
|
55 |
Four digit hexadecimal code |
55 |
|
55 |
|
55 |
Six character field replaceable unit description |
55 |
|
55 |
|
55 |
Description of the chassis code |
55 |
|
56 |
|
56 |
|
56 |
Three character chassis code |
56 |
|
56 |
|
56 |
Four digit hexadecimal code |
56 |
|
56 |
|
56 |
Six character field replaceable unit description |
56 |
|
56 |
|
56 |
Description of the chassis code |
56 |
LCD DIMM Failure Message |
56 |
LCD DIMM Failure Message |
56 |
<GRAPHIC> |
56 |
<TABLE> |
56 |
Table 36 Description of the LCD Message |
56 |
<TABLE BODY> |
56 |
<TABLE ROW> |
56 |
FLT |
56 |
FLT |
56 |
Three character chassis code |
56 |
<TABLE ROW> |
56 |
7853 |
56 |
7853 |
56 |
Four digit hexadecimal code |
56 |
<TABLE ROW> |
56 |
DIMM |
56 |
DIMM |
56 |
Six character field replaceable unit description |
56 |
<TABLE ROW> |
56 |
MBE in DIMM 03 |
56 |
MBE in DIMM 03 |
56 |
Description of the chassis code |
56 |
Troubleshooting Monitor Problems |
57 |
Troubleshooting Monitor Problems |
57 |
Monitor, troubleshooting |
57 |
1. Turn system power off. |
57 |
1. Turn system power off. |
57 |
2. Disconnect the computer keyboard connector from the system rear panel. |
57 |
3. Connect a serial terminal to the Serial 1 connector (the top serial connector) on the system r... |
57 |
4. Power on the system. The system will now display the console to the terminal connected to Seri... |
57 |
5. Set the monitor type and path using the Boot Console Handler. For information on doing this se... |
57 |
Running System Verification Tests |
58 |
Running System Verification Tests |
58 |
System verification tests, running |
58 |
cstm |
58 |
mstm |
58 |
xstm |
58 |
A Regulatory Statements |
59 |
A Regulatory Statements |
59 |
<TABLE> |
60 |
<TABLE HEADING> |
60 |
<TABLE ROW> |
60 |
Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014 |
60 |
<TABLE BODY> |
60 |
<TABLE ROW> |
60 |
Manufacturer:Hewlett-Packard Company ... |
60 |
Manufacturer |
60 |
Safety |
60 |
Safety |
60 |
Safety |
60 |
IEC 950:1991+A1+A2+A3+A4/EN 60950:1992+A1+A2+A3+A4 IEC 60825-1:1993/EN60825-1:1994+A11 Class 1 fo... |
60 |
EMC |
60 |
EMC |
60 |
CISPR 22: 1997 / EN 55022: 1998 Class A CISPR 24: 1997 / EN 55024: 1998 IEC 1000-3-2: 1994 / EN 6... |
60 |
and is certified by: |
60 |
and is certified by: |
60 |
and is certified by: |
60 |
and is certified by: |
60 |
UL Listed to UL1950, 2nd edition, File E146385 cUL Listed to CSA 22.2 No. 950-M93 TÜV Certified t... |
60 |
supplementary information: |
60 |
For Compliance Information ONLY, contact: |
60 |
Electromagnetic Compatibility |
61 |
Electromagnetic Compatibility |
61 |
Federal Communications Commission (FCC) |
61 |
Federal Communications Commission (FCC) |
61 |
• This device may not cause harmful interference. |
61 |
• This device may not cause harmful interference. |
61 |
• This device must accept interference received, including interference that may cause undesired ... |
61 |
• Cables used with this device must be properly shielded to comply with the requirement of the FCC. |
61 |
• You are cautioned that any changes or modifications not expressly approved in this manual could... |
61 |
VCCI Statement for Class A Products |
62 |
VCCI Statement for Class A Products |
62 |
<GRAPHIC> |
62 |
Korea RRL Statement for Class A Product |
62 |
<GRAPHIC> |
62 |
Taiwan Class A Warning |
62 |
<GRAPHIC> |
63 |
Optical and Acoustical Statements |
63 |
Visible LED Statement |
63 |
Visible LED Statement |
63 |
Laser Safety Statement for a Class 1 Laser Product |
63 |
Laser Safety Statement for a Class 1 Laser Product |
63 |
Regulation on Noise Declaration for Machines |
63 |
Regulation on Noise Declaration for Machines |
63 |
A |
65 |
B |
65 |
C |
65 |
D |
65 |
E |
65 |
F |
65 |
G |
65 |
H |
65 |
I |
65 |
L |
65 |
M |
65 |
N |
65 |
O |
65 |
P |
65 |
R |
65 |
S |
65 |
U |
65 |
V |
65 |