HP e-Printer e20 HP e-printer e20 - (English) Users Guide - Page 9
Removing and Replacing Print, Cartridges
View all HP e-Printer e20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4. Insert the black print cartridge in the left side of the cradle. Removing and Replacing Print Cartridges 1. Open the front cover of the printer. The print cartridge cradle moves to the center of the printer. 5. Push the print cartridge up to snap it into position. 2. Push down the wire lever to release the printer cartridge from the cradle. 6. Repeat steps 3 through 5 to insert the tri-color print cartridge in the right side of the cradle. Caution! The printer will not operate unless both print cartridges are properly installed. 7. Close the front cover of the printer. The Resume light continues to blink for a few seconds and then stops. The print cartridge cradle returns to the right side of the printer. If the Resume light continues to blink, see "Solving a Problem" for help. 3. Follow steps 3 through 6 in "Installing the Print Cartridges" to install new print cartridges. ENGLISH 3