HP rp7440 User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000
HP rp7440 Manual
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP rp7440 manual content summary:
- HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 1
HP Integrity rx7640 and HP 9000 rp7440 Servers User Service Guide HP Part Number: AB312-9010A Published: November 2007 Edition: Fourth Edition - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 3
1 HP Integrity rx7640 Server and HP 9000 rp7440 Server Overview 19 Detailed Server Description...19 Dimensions and Components...20 Front Panel...23 Front Panel Indicators and Controls 23 Enclosure Status LEDs...23 Cell Board...24 PDH Riser Board...25 Central Processor Units...25 Memory Subsystem - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 4
the Management Processor via a Web Browser 79 Verifying the Presence of the Cell Boards 80 System Console Selection...81 VGA Consoles...82 Interface Differences Between Itanium-based Systems 82 Other Console Types...82 Additional Notes on Console Selection 82 Configuring the Server for HP-UX - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 5
Booting HP-UX Using the EFI Shell 84 Adding Processors with Instant Capacity 84 Installation Checklist...85 4 Booting and Shutting Down the Operating System 89 Operating Systems Supported on Cell-based HP Servers 89 System Boot Configuration Options...90 HP 9000 Boot Configuration Options 90 HP - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 6
Server Management Behavior...133 Thermal Monitoring...134 Fan Control...134 Power Control...135 Updating Firmware...135 Firmware Manager ...135 Using FTP to Update Firmware...135 Possible Error Messages...136 PDC Code CRU Reporting...136 Verifying Cell Board Insertion...138 Cell Board Supported In HP - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 7
Power Supply 171 Removing a BPS...172 Replacing a BPS...174 Configuring Management Processor (MP) Network Settings 174 7 HP Integrity rp7440 Server 177 Electrical and Cooling Specifications 177 Boot Console Handler (BCH) for the HP Integrity rx7640 and HP 9000 rp7440 Servers 178 Booting an HP - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 8
8 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 9
1-1 8-Socket Server Block Diagram...20 1-2 Server (Front View With Bezel) ...21 1-3 Server (Front View Without Bezel 21 1-4 Right-Front View...22 1-5 Left-Rear View ...23 1-6 Front Panel LEDs and Power Switch 24 1-7 Cell Board...24 1-8 CPU Locations on Cell Board...26 1-9 Memory Subsystem...27 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 10
Fan LEDs 126 5-5 Cell Board LED Locations...127 5-6 PCI-X OL* LED Locations...128 5-7 Core I/O Card Bulkhead LEDs...129 5-8 Core I/O Button Locations...130 5-9 Disk Drive LED Location...132 5-10 Temperature States...134 5-11 Firmware Update Command Sample 136 5-12 Server Cabinet CRUs (Front View - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 11
Configuration for Management Processor LAN 174 7-1 System Power Requirements for the HP Integrity rx7640 and HP 9000 rp7440 Servers............177 7-2 Typical Server Configurations for the HP 9000 rp7440 Server 177 A-1 Server CRU Descriptions and Part Numbers 185 B-1 Service Commands...187 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 12
12 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 13
List of Examples 4-1 Single-User HP-UX Boot...101 7-1 Single-User HP-UX Boot...181 13 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 14
14 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 15
• Chapter 5 - Server Troubleshooting • Chapter 6 - Removal and Replacement • Chapter 7 - HP 9000 rp7440 Server • Appendix A - Replaceable Parts • Appendix B - MP Commands • Appendix C - DIMM Slot Mapping • Appendix D - Templates • Index Intended Audience This document is intended to be used by - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 16
management, Microsoft® Windows® administration, and diagnostic support tools at the following Web sites: http://docs.hp.com The main Web site for HP technical documentation is http://docs.hp.com. Server Hardware Information: http://docs.hp.com/hpux/hw/ The http://docs.hp.com/hpux/hw/ Web site is the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 17
, recommendations, or important details about HP product features. • Commands and options are represented using this font. • Text that you type exactly as shown is represented using this font. • Text to be replaced with text that you supply is represented using this font. Example: "Enter the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 18
HP Encourages Your Comments Hewlett-Packard welcomes your feedback on this publication. Please address your comments to [email protected] and note that you will not receive an immediate reply. All comments are appreciated. 18 About this Document - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 19
HP 9000 rp7440 Server only. IMPORTANT: Ensure a valid UUID is either in place or available prior to maintenance of these servers. This step is vital when performing upgrades and is recommended for existing hardware service restoration. Specific information for upgrades is found in the Upgrade Guide - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 20
Figure 1-1 8-Socket Server Block Diagram Cell Board 0 Memory Cell Board 0 Memory PDH CPU CPU CC CPU CPU CPU CPU CC CPU CPU CC Link Bulk Power Supply (x2) Clocks Reset System Backplane PCI-X Power (x2) Indicates hot pluggable link or bus Indicates cable SBA Link SBA LBA LBA LBA LBA - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 21
Figure 1-2 Server (Front View With Bezel) Figure 1-3 Server (Front View Without Bezel) Power Switch Removable Media Drive PCI Power Supplies Front OLR Fans Bulk Power Supplies Hard Disk Drives Detailed Server Description 21 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 22
Front Panel Display Board PCI Power Supplies Cell Boards B Bulk Power Supplies Access the PCI-X card section, located toward the rear, by removing the top cover. The PCI card bulkhead connectors are located at the rear top. 22 HP Integrity rx7640 Server and HP 9000 rp7440 Server Overview - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 23
mounted on the rear surface. The cell boards are accessed from the right side of the chassis behind a removable side cover. The two MP/SCSI boards are positioned vertically at the rear of the chassis. The two hot-pluggable N+1 redundant bulk power supplies provide a wide input voltage range. They - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 24
Front Panel LEDs and Power Switch Cell Board The cell board, illustrated in Figure 1-7, contains the processors, main memory, and the CC application specific integrated circuit (ASIC) which interfaces the processors and memory with the I/O, and to the other cell board in the server. The CC is the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 25
1-8 for the locations on the cell board for installing processor modules. NOTE: Unlike previous HP cell based systems, the HP Integrity rx7640 server cell board does not require that a termination module be installed at the end of an unused FSB. System firmware is allowed to disable an unused - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 26
comprises four independent quadrants. Each quadrant has its own memory data bus connected from the cell controller to the two buffers for the memory quadrant. Each quadrant also has two memory control buses; one for each buffer. 26 HP Integrity rx7640 Server and HP 9000 rp7440 Server Overview - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 27
DIMM modules are not supported. The server supports DIMMs with densities of 1, 2, and 4 Gb. Table 1-2 (page 27) lists each supported DIMM size, the resulting total system capacity, and the memory component density. Each DIMM is connected to two buffer chips on the cell board. See Appendix C for more - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 28
, power supplies, and fans. A server complex can contain one or two nPartitions, enabling the hardware to function as a single system or as multiple systems. NOTE: Partition configuration information is available on the Web at: http://docs.hp.com Refer to HP System Partitions Guide: Administration - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 29
MP/SCSI MP Core I/O MP/SCSI System backplane PCI-X backplane Cell board 1 Cell board 0 Cell boards are perpendicular to the system backplane. Bulk power supply System Bacplane to PCI-X Backplane Connectivity The PCI-X backplane uses two connectors for the SBA link bus and two connectors for the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 30
in cell slot 1. Table 1-3 PCI-X paths for Cell 0 Cell PCI-X Slot IO Chassis Path 0 1 0 0/0/8/1 0 2 0 0/0/10/1 0 3 0 0/0/12/1 0 4 0 0/0/14/1 0 5 0 0/0/6/1 0 6 0 0/0/4/1 0 7 0 0/0/2/1 0 8 0 0/0/1/1 30 HP Integrity rx7640 Server and HP 9000 rp7440 Server Overview - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 31
is physically one board, but it specific PCI card performance specifications. PCI, PCI-X mode 1, and PCI-X mode 2 cards are supported at different clock speeds. Select the appropriate PCI-X I/O slot for best performance. Table 1-5 lists the PCI-X slot types supported on the server. Detailed Server - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 32
® Itanium® processor 9100 Series cell controller ASIC on the host cell board via a high bandwidth logical connection known as the HSS link.When installed in the SEU chassis within a fully configured system, the ASIC on cell location 0 connects 32 HP Integrity rx7640 Server and HP 9000 rp7440 Server - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 33
cell board 3 through external link cables. Downstream, the ASIC spawns 16 logical 'ropes' that communicate with the core I/O bridge on the system backplane, PCI interface chips, and PCIe interface chips. Each PCI chip produces a single 64-bit PCI-X bus supporting support to support 6 to support 8 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 34
the required board and another that can accommodate either a second LAN/SCSI board or any other supported add-in PCI-X card. The LAN/SCSI board is enables power to the internal removable media device to be programmatically cycled. 34 HP Integrity rx7640 Server and HP 9000 rp7440 Server Overview - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 35
.4 (9.25) 18.0 (8.2) each 1.0 (0.45) 5.0 (2.27) each 1.60 (0.73) each 2.20 (1.00) each Table 2-3 Example Weight Summary Component Cell board PCI card (varies - used sample value) Power supply (BPS) Quantity 2 4 2 Multiply 27.8 (12.16) 0.34 (0.153) 18 (8.2) Weight (kg) 107.20 (48.64) 1.36 (0.61 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 36
weight Table 2-4 Weight Summary Component Cell Board PCI Card Power Supply (BPS) DVD Drive Hard Disk server can receive AC input from two different AC power sources. System AC Power Specifications Power Cords Table 2-5 lists the various power cables available for use with the server. Each power - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 37
Where Used International - Other International - Europe China North America/Japan System Power Specifications Table 2-6 lists the AC power requirements for the HP Integrity rx7640 and HP 9000 rp7440 Serversservers. Table 2-7 lists the system power requirements for the HP 9000 rp7440 Server. For - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 38
able to produce for the server with any combination of hardware under laboratory conditions using aggressive software applications designed specifically to work the system at maximum load. This number can safely be used to compute thermal loads and power consumption for the system under all - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 39
. The fans within the power supply will operate at full speed during standby. Typical Power Dissipation and Cooling Table 2-9 provides calculations for configurations for the HP 9000 rp7440 Server. For calculations for the HP Integrity rx7640 Server, see Chapter 7. Environmental Specifications 39 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 40
Table 2-9 Typical Server Configurations for the HP Integrity rx7640 Server Cell Boards Qty 2 2 2 1 Memory Per PCI Cards DVDs Cell Board (assumes 10 watts each) GBytes Qty Qty 32 16 2 16 8 0 8 8 0 8 8 0 Hard Disk Core I/O Bulk Power Typical Drives Supplies Power Qty Qty Qty 4 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 41
is required to support these devices. Maximum power is the sum of the worst case power consumption of every subsystem in the box and should be used to size worst case power consumption. Typical power consumption numbers are what HP engineers have measured when running power-intensive applications - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 42
42 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 43
parts, the HP Installation Specialist must contact the local Order Fulfillment group which will coordinate the replacement with the factory. Unpacking the Server roll the cabinet off the pallet before starting. Remove the server cabinet using the following steps: 1. Cut the polystrap bands around the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 44
off represents an electrostatic discharge (ESD) hazard to the hardware. 5. Remove the four bolts holding down the ramps, and remove the ramps. 44 Installing the Server - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 45
NOTE: Figure 3-2 shows one ramp attached to the pallet on either side of the cabinet with each ramp secured to the pallet using two bolts. In an alternate configuration, the ramps are secured together on one side of the cabinet with one bolt. Figure 3-2 Removing the Shipping Bolts - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 46
time you roll the rack on the casters. Use caution when rolling the cabinet off the ramp. A single server in the cabinet weighs approximately 508 lb. It . Securing the Cabinet When in position, secure and stabilize the cabinet using the leveling feet at the corners of the base (Figure 3-4). Install - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 47
.com/application/view/ProdCenter.asp?OID=1130382 Lifting the Server Cabinet Manually Use this procedure only if no HP approved lift is available. CAUTION: This procedure must only be performed by four qualified HP Service Personnel utilizing proper lifting techniques and procedures. CAUTION: Observe - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 48
occur through improper removal and reinstallation of bulk power supplies and cell boards. Refer to Chapter 6: Removing and Replacing Components protruding tabs on rear flange of handle into the slotted keyways in the server's chassis. See Figure 3-5. Figure 3-5 Inserting Rear Handle Tabs into Chassis - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 49
remove the lift handles from the chassis. 11. After the server is secured, replace the previously removed cell boards and bulk power supplies. 12. Reinstall the side covers and front bezel. Using the RonI Model 17000 SP 400 Lifting Device Use the lifter designed by the RonI company to rack-mount the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 50
from the same cabinet while installing or servicing another server product. Failure to follow these instructions could result in the cabinet tipping over. Figure 3-7 RonI Lifter 1. Obtain the HP J1530C Rack Integration Kit Installation Guide before proceeding with the rack mount procedure. This - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 51
Figure 3-8 Positioning the Lifter to the Pallet 4. Carefully slide server onto lifter forks. 5. Slowly raise the server off the pallet until it clears the pallet cushions. Using the RonI Model 17000 SP 400 Lifting Device 51 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 52
the interlock device assembly (if two servers are in the same cabinet) Wheel Kit Installation Compare the packing list (Table 3-1) with the contents of the wheel kit before beginning the installation. For a more updated list of part numbers, go to the HP Part Surfer web site at: http://www - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 53
. These bands are under tension. When cut, they can spring back and cause serious eye injury. Use the following procedure to install the wheel kit. 1. Cut and remove the polystrap bands securing the HP server to the pallet. 2. Lift the carton top from the cardboard tray resting on the pallet - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 54
3-11 Left Foam Block Position 6. Carefully tilt the server and place the other foam block provided in the kit under the right side of the server. Figure 3-12 Right Foam Block Position 7. Remove the cushions from the lower front and rear of the server. Do not disturb the side cushions. 54 Installing - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 55
Locate and identify the caster assemblies. Use the following table to identify the casters. NOTE: The caster part number is stamped on the caster mounting plate. Table 3-2 Caster Part Numbers Caster Right front Right rear Left front Left rear Part Number A6753-04001 A6753-04005 A6753-04006 A6753 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 56
Figure 3-14 Attaching a Caster to the Server 10. Attach the remaining casters to the server using the screws supplied in the plastic pouch. 11. Remove the foam blocks from the left and right side of the server. 12. Locate the plywood ramp. 13. Attach the ramp to the edge of the pallet. NOTE: There - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 57
, and the front bezel and all covers are installed. Figure 3-16 Completed Server Installing the Power Distribution Unit The server may ship with a power distribution unit (PDU). Two 60 A PDUs available for the server. Each PDU 3 U high and is mounted horizontally between the rear columns of the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 58
are located in the front of the chassis (Figure 3-17). The hard disk drives are hot-plug drives. A list of replacement disk drives for the server is in Appendix A of the HP Service Guide. The list contains both removable media disk drives and hard disk drives. 58 Installing the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 59
1/0/1/1/0/4/1.6.0 Drive 0-2 Path: 0/0/1/1/0/4/1.5.0 Drive 0-1 Path: 0/0/0/3/0.6.0 Use the following procedure to install the disk drives: 1. Booting and Shutting Down the Operating System, see "Powering Off Hardware Components and Powering On the Server" (page 142), and see "Removing and Replacing - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 60
cards can lose boot functionality in the HP Integrity rx7640 server. The customer must use another I/O card to retain boot functionality if the customer's card is not supported in the rx7640 server. Table 3-3 HP Integrity rx7640 PCI-X and PCIe I/O Cards Part Number A4926A A4929A A5158A A5230A Card - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 61
(continued) Part Number A5506B A5838A A6386A A6749A A6795A A6825A A6826A1 A6828A A6829A A6847A A6869B2 A7011A A7012A A7173A A9782A1 A9784A1 A9890A A9891A AB232A1 AB286A AB286C AB287A AB290A AB345A AB345C AB378A1 AB378B1 AB379A1 AB379B1 AB429A1 AB465A1 AB466A1 AB467A1 AB545A Card Description HP-UX - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 62
rx7640 PCI-X and PCIe I/O Cards (continued) Part Number AD167A1 AD168A1 AD193A AD194A AD278A AD279A AD307A J3525A 337972-B21 A8002A A8003A AD299A AD300A AD313A AD337A AD338A AE311A AH226A AD355A Card Description HP-UX Emulex 4Gb/s Emulex 4Gb/s DC 1 port 4Gb FC & 1 port GbE HBA PCI-X Bb - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 63
the LOA card in the lowest numbered slot possible. The server implements manual release latch (MRL) hardware for use in online add or replacement (OLAR) operations. If an MRL is left open while the server is booting, HP-UX can incorrectly cache PCI slot power status causing OLAR operations to fail - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 64
be downloaded from the http://docs.hp.com/ Web site. Background information and procedures for adding a new PCI I/O card using online addition are found in the Interface Card OL* Support Guide. PCI I/O OL* Card Methods There are three methods for performing OL* operations on PCI I/O cards. pdweb - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 65
control over CRA actions use pdweb or the olrad command. Refer to the Interface Card OL* Support Guide located on the Web at http://docs.hp.com for details. 9. Replace the top cover. 10. Connect all cables to the installed PCI card. Installing an A6869B VGA/USB PCI Card in a Server The A6869B VGA - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 66
For these cards, you must shut down Windows® on the nPartition before performing the card replacement or addition. See the section on Shutting Down nPartitions and Powering off Hardware Components in the appropriate service guide. 1. If the A6869B VGA/USB PCI card is currently not installed, follow - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 67
and set correctly. Reference URL There are many features available for HP Servers at this website including links to download Windows® Drivers. HP Servers Technical Support http://www.hp.com/support/itaniumservers Cabling and Power Up After the system has been unpacked and moved into position - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 68
Perform these measurements for every power cord that plugs into the server. 1. Measure the voltage between L1 and L2. This is considered to be a phase-to-phase measurement in North America. In Europe and certain parts the Safety Ground (Single Power Source) Use this procedure to measure the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 69
server cabinet. Verifying the Safety Ground (Dual Power Source) Use this procedure to measure the voltage level between A0 and A1, between B0 and B1, between A0 and B0, and between A1 and B1. Take all measurements between ground pins. Refer to Figure 3-23 for ground reference points when performing - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 70
while testing primary power. Use properly insulated probes. Be sure to replace access cover when finished testing primary power. 1. Measure V or greater, escalate the situation. Do not attempt to plug the power cord into the server cabinet. 2. Measure the voltage between B0 and B1 as follows: 1. - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 71
. Perform this procedure if the previous voltage check procedure did not yield the expected results. NOTE: If you use an uninterrupted power supply (UPS), refer to the applicable UPS documentation for information on connecting the server and checking the UPS output voltage. UPS user documentation - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 72
A0 and B0 or A1 and B1 should be used. All other combinations are not supported. Either combination requires two power cords. Figure 3-25 AC Power Input Labeling MP/SCSI Core I/O card Slot 0 MP/SCSI Core I/O card Slot 1 The server has two power cord configurations: • All four line cords (preferred - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 73
cords to the server preventing accidental removal of the cords from the server. Two Cell Server Installation (rp7410, rp7420, rp7440, rx7620, rx7640) There are 3 studs with thumb nuts located at the rear of the server chassis. The line cord anchor installs on these studs. Cabling and Power Up 73 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 74
: "Line Cord Anchor Attach Straps", Figure 3-27 Two Cell Line Cord Anchor (rp7410, rp7420, rp7440, rx7620, rx7640) Figure 3-28 Line Cord Anchor Attach Straps Attach Straps Core I/O Connections Each server can have up to two core I/O board sets installed which allows for two partitions to operate - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 75
server. Connections to the MP/SCSI board include the following: • DB9 connector for Local Console • 10/100 Base-T LAN RJ45 connector (for LAN and Web Console access) This LAN uses standby power the MP LAN configurations • Shutting down cell board power Establish communication with the MP by - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 76
MP After connecting the serial device, it is possible to log in to the Management Processor (MP). +3.3 DC Housekeeping power (HKP) (also known as standby power) is active as soon as AC power is applied to the server. As the MP uses housekeeping power, it is possible to log in to the MP even when the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 77
Menu Configuring LAN Information for the MP This section describes how to set and verify the server management processor (MP) LAN port information. LAN information includes the MP network name, the MP IP file, as it may be required for future troubleshooting. See .Figure 3-31 Cabling and Power Up 77 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 78
64 characters in length, and include alphanumeric characters, - (dash), _ (under bar),. (period), or a space. HP recommends that the name be a derivative of the complex name. For example, Acme.com_MP. 8. Enter the LAN parameters at the MP Command Menu prompt (MP:CM>). 78 Installing the Server - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 79
a Web browser, perform the following steps: 1. Connect to the MP using a serial connection. 2. Configure the MP LAN. Refer to "Configuring LAN Information for the MP". 3. Type CMto enter the Command Menu. 4. Type SA at the MP:CM> prompt to display and set MP remote access. Cabling and Power Up 79 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 80
MP when the login window appears. Access to the MP via a Web browser is now possible. Verifying the Presence of the Cell Boards To perform this activity, either connect to the MP using a console, or connect the CE Tool (laptop) to the RS-232 Local port on the MP/SCSI card. 80 Installing the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 81
the cell boards: 1. At the MP prompt, enter cm. This displays the Command Menu. The Command Menu enables viewing or modifying the configuration and viewing the utilities controlled by the MP. To view a list of the commands available, enter he. Press Enter to see more than one screen of commands. Use - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 82
your console type(PcAnsi, Vt100, Vt100+, VtUtf8) and deselect everything else. If you choose either a system or MP serial port HP recommends that you use a vt100+ capable terminal device. Additional Notes on Console Selection Each Operating System makes decisions based on the EFI Boot Maintenance - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 83
value. 4. Continue with installation of HP-UX. Booting the Server Power on the server either by pressing the power switch on the front panel or by using the PE command to power on the cabinet or complex at the management processor Command Menu. If you are using a LAN crossover cable with the laptop - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 84
where system configuration can be reset, configured or viewed. • memory -- memory related commands. Once the parameters have been verified, enter x to return to the EFI Main Menu. Booting HP-UX Using the EFI Shell If the Instant Ignition was ordered, HP-UX will have been installed in the factory at - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 85
diag2 best [413F2ED6] • B8465BA - A.02.00.04 - HP WBEM Services for HP-UX • NPar Provider - B.11.23.01.03.00.06 - nPartition Provider Current information on installing, configuring, and troubleshooting iCAP version 8.x is available at: http://docs.hp.com/en/B9073-90129/index.html. Information on the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 86
Install anti-tip plates Inspect cables for proper installation Set up CE tool and connect to Remote RS-232 port on MP Apply power to cabinet (Housekeeping) Check power to BPSs Log in to MP Set LAN IP address on MP Connect customer console Set up network on customer console Verify LAN - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 87
PCI card Verify installation Route cables using the cable management arm Install other peripherals (if required) Perform visual inspection and complete installation Set up network services (if required) Enable iCOD (if available) Final inspection of circuit boards Final inspection of cabling Area - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 88
88 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 89
supported on cell-based servers based on the HP sx2000 chipset. • HP 9000 servers have PA-RISC processors and include the following cell-based models based on based on the HP sx2000 chipset: - HP 9000 Superdome (SD16B, SD32B, and SD64B models) - HP rp8440 - HP rp7440 These HP 9000 servers run HP - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 90
that are specific to each nPartition in the server complex. HP 9000 Boot Configuration Options On cell-based HP 9000 servers the configurable system boot options include boot device paths (PRI, HAA, and ALT) and the autoboot setting for the nPartition. To set these options from HP-UX, use the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 91
use the OpenVMS I64 Boot Manager utility (BOOT_OPTIONS.COM). For more information on this utility and other restrictions, refer to the HP OpenVMS for Integrity Servers Upgrade and Installation Manual ® processors can support Hyper-Threading. Hyper-Threading provides the ability for processors to - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 92
means that each processor core in the HP-UX, use the setboot command. • ACPI Configuration Value-HP Integrity Server OS Boot On cell-based HP Integrity servers supported OSes are in the following list. - HP-UX ACPI Configuration: default On cell-based HP Integrity servers, to boot or install the HP - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 93
powered off. To power on hardware that has been powered off, use the PE command at the management processor Command Menu. - acpiconfig disable softpowerdown When set on HP rx7620, rx7640, rx8620, and rx8640 servers, acpiconfig disable softpowerdown causes nPartition cells not support HP-UX virtual - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 94
"Shutting Down HP-UX" (page 103). HP-UX Support for Cell Local Memory On servers based on the HP sx2000 chipset, each cell has a cell local memory (CLM) parameter, which determines how firmware interleaves memory residing on the cell. IMPORTANT: HP-UX 11i Version 2 (B.11.23) supports using CLM. The - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 95
HP-UX boot option when logged in to HP-UX, use the setboot command. For details, refer to the setboot(1M) manpage. 1. Access the EFI Shell environment. Log in to the management processor item number specified by # from the boot options list. • bcfg boot mv #a #b - Move the item number specified by - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 96
) configuration for HP-UX. Standard HP-UX Booting This section describes how to boot HP-UX on cell-based HP 9000 servers and cell-based HP Integrity servers. • On HP 9000 servers, to boot HP-UX refer to "HP-UX Booting (BCH Menu)" (page 96). • On HP Integrity servers, to boot HP-UX use either of the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 97
command or menu > 3. Boot the device by using the BOOT command from the BCH interface. You can BOOT... INSTALL commands boot HP-UX from the default HP-UX install server or from the server specified by ip-address. boot an HP-UX kernel other than /stand/vmunix, or to boot HP-UX in single-user or LVM - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 98
. To exit the management processor, enter X at the Main Menu. Procedure 4-3 HP-UX Booting (EFI Boot Manager) From the EFI Boot Manager menu, select an item from the boot options list to boot HP-UX using that boot option. The EFI Boot Manager is available only on HP Integrity servers. Refer to "ACPI - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 99
the local nPartition. On cell-based HP Integrity servers, to boot the HP-UX OS, an nPartition number 2. The EFI Shell prompt changes to reflect the file system currently accessed. The file system number the \EFI\HPUX\AUTO file and boots HP-UX using the default boot behavior specified in the AUTO - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 100
processor, enter X at the Main Menu. Single-User Mode HP-UX Booting This section describes how to boot HP-UX in single-user mode on cell-based HP 9000 servers and cell-based HP Integrity servers. • On HP 9000 servers, to boot HP-UX in single-user mode, refer to "Single-User Mode HP by using the BOOT - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 101
available only on HP Integrity servers. Refer to "ACPI Configuration for HP-UX Must Be default" (page 96) for required configuration details. 1. Access the EFI Shell environment for the nPartition on which you want to boot HP-UX in single-user mode. Log in to the management processor, and enter CO - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 102
Menu. To exit the management processor, enter X at the Main Menu. LVM-Maintenance Mode HP-UX Booting This section describes how to boot HP-UX in LVM-maintenance mode on cell-based HP 9000 servers and cell-based HP Integrity servers. • On HP 9000 servers, to boot HP-UX in LVM-maintenance mode, refer - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 103
from which you want to boot HP-UX (fsX: where X is the file system number). 3. When accessing the EFI HP-UX using the shutdown command. On nPartitions you have the following options when shutting down HP-UX: • To shut down HP-UX and reboot an nPartition: shutdown -r On cell-based HP Integrity servers - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 104
-OS Shutdown Behavior" (page 92). To reboot the nPartition, you must do so manually by using the BO command at the management processor Command Menu. If HP-UX is halted on the nPartition, thus not allowing you to use the shutdown command, you can reboot or reset the nPartition by issuing commands - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 105
OpenVMS" (page 108). HP OpenVMS I64 Support for Cell Local Memory On servers based on the HP sx2000 chipset, each cell has a cell local memory (CLM) parameter, which determines how firmware interleaves memory residing on the cell. IMPORTANT: HP OpenVMS I64 does not support using CLM. Before booting - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 106
Fibre Channel devices, you must use the OpenVMS I64 Boot Manager utility (BOOT_OPTIONS.COM). For more information on this utility and other restrictions, refer to the HP OpenVMS for Integrity Servers Upgrade and Installation Manual. Procedure 4-10 Adding an HP OpenVMS Boot Option This procedure adds - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 107
To boot HP OpenVMS I64 on a cell-based HP Integrity server use either of the following procedures. • "Booting HP OpenVMS (EFI Boot Manager)" (page 107) • "Booting HP OpenVMS (EFI Shell)" (page 107) CAUTION: ACPI Configuration for HP OpenVMS I64 Must Be default On cell-based HP Integrity servers, to - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 108
HP OpenVMS (fsX:, where X is the file system number). For example, enter fs2: to access the EFI System Partition for the bootable file system number Log in to HP OpenVMS running on the system that you want to shut down. Log in to the management processor (MP) for the server and use the Console menu - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 109
the site-specific shutdown procedure [YES]? Should an automatic system reboot be performed [NO]? yes Support for Cell Local Memory On servers based on the HP sx2000 chipset, each cell has a cell local memory (CLM) parameter, which determines how firmware interleaves memory residing on the cell - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 110
nPartition number). For details, refer to the HP System Partitions Guide or the Partition Manager Web site (http://docs.hp.com/en/PARMGR2/). To display CLM configuration details from the EFI Shell on a cell-based HP Integrity server, use the info mem command. If the amount of noninterleaved memory - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 111
this exits the system console and returns to the management processor Main Menu. To exit the management processor, enter X at the Main Menu. Booting Microsoft Windows You can boot the Windows Server 2003 OS on an HP Integrity server by using the EFI Boot Manager to choose the appropriate Windows - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 112
CAUTION: ACPI Configuration for Windows Must Be windows On cell-based HP Integrity servers, to boot the Windows OS, an nPartition ACPI specific boot device and provides a specific set of boot options or arguments to be used when booting the device. 3. Press Enter to initiate booting using - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 113
to the help shutdown Windows command for details. NOTE: On HP rx7620, rx7640, rx8620, and rx8640 servers, performing a shutdown using shutdown /s (or the equivalent Start->Shut Down, Shut down) powers off the server cabinet or powers off the cells and I/O chassis assigned to the nPartition. You can - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 114
reboot (either power down server hardware or Support for Cell Local Memory On servers based on the HP sx2000 chipset, each cell has a cell local memory (CLM) parameter, which determines how firmware interleaves memory residing on the cell. IMPORTANT: Red Hat Enterprise Linux does not support using - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 115
nPartition number). For details, refer to the HP System Partitions Guide or the Partition Manager Web site (http://docs.hp.com/en/PARMGR2/). To display CLM configuration details from the EFI Shell on a cell-based HP Integrity server, use the info mem command. If the amount of noninterleaved memory - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 116
exits the system console and returns to the management processor Main Menu. To exit the management processor, enter X at the Main Menu. Booting Red Hat Enterprise Linux You can boot the Red Hat Enterprise Linux OS on HP Integrity servers using either of the methods described in this section. Refer - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 117
(for example, type a space) at the ELILO boot prompt. To exit the loader, use the exit command. Booting SuSE Linux Enterprise Server You can boot the SuSE Linux Enterprise Server 9 OS on HP Integrity servers using either of the methods described in this section. Booting and Shutting Down Linux 117 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 118
Server OS. CAUTION: ACPI Configuration for SuSE Linux Enterprise Server Must Be default On cell-based HP Integrity servers, to boot the SuSE Linux Enterprise Server efi\SuSE\elilo.conf By default the ELILO.EFI loader boots Linux using the kernel image and parameters specified by the default entry in - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 119
: -h Halt after shutdown. On cell-based HP Integrity servers, this either powers down server hardware or puts the nPartition into a shutdown for reconfiguration state. Use the PE command at the management processor Command Menu to manually power on or power off server hardware, as needed. -r Reboot - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 120
2. Issue the shutdown command with the desired command-line options, and include the required time argument to specify when the operating shutdown is to occur. For example, shutdown -r +20 will shut down and reboot the system starting in 20 minutes. 120 Booting and Shutting Down the Operating System - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 121
cord and restart the server. f. If you suspect a hardware error: 1. Log users off the LAN and power down the server. 2. Simplify the server to the minimum configuration. The minimum configuration consists of the following: • One cell board • One processor • One pair of memory DIMMs • One MP/SCSI - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 122
Panel with LED Indicators Table 5-1 Front Panel LEDs LED Power Status Off Red Yellow Flash Green On Green Description 48 V Off BPS or PCI power module absent. Non-redundant power condition exists Server cabinet is powering off. OS shutdown is in progress. 48 V Good. 122 Server Troubleshooting - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 123
Yellow (Solid) Blue (flashing) Cell not present User requests locator ON and specifies (1 - 72) hour off timeout. Default timeout is 24 hours. Off Timeout. Or user requests locator off. Bulk Power Supply LEDs There is a single three-color LED on each bulk power supply. Server LED Indicators 123 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 124
Blinking Green Green Blinking Yellow Yellow Blinking Used BPS fault or failure, no power cords installed or no power to the chassis PCI-X Power Supply LEDs There are two LEDs on the PCI-X power supply. A green power LED and a multi-color LED reports warnings and faults. 124 Server Troubleshooting - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 125
limit. Power supply has shut down due to an over temperature condition, a failure to regulate the power within expected limits, or a current-limit condition. Normal operation. System and PCI I/O Fan LEDs There is a single three-color LED on each system and PCI I/O fan. Server LED Indicators - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 126
No power OL* LEDs Cell Board LEDs There is one green power LED located next to each ejector on the cell board in the server that indicates the power is good. When the LED is illuminated green, power is being supplied to the cell board and it is unsafe to remove the cell board from the server. There - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 127
Standby (Green) Manageability Fab (Green) SM (Green) BIB (Green) Cell Power (Green) Attention (Yellow) V12 Standby (Green) Table 5-5 Cell Board OL* LED Indicators Location LED On cell board Power (located in the server cabinet) Driven by Cell LPM Attention MP via GPM State On Green Off - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 128
Figure 5-6 PCI-X OL* LED Locations Slot Attention (Yellow) Slot Power (Green) Card Divider Core I/O LEDs The core I/O LEDs are located on the bulkhead of the installed core I/O PCA. Refer to Table 5-6 "Core I/O LEDs" to determine status and description. . 128 Server Troubleshooting - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 129
LEDs LED (as silk-screened on the State bulkhead) Power On Green Attention On Yellow MP LAN 10 BT On Reset On Amber Active On Green MP Power On Green Description I/O power on PCI attention MP LAN in the system Indicates standby power is on Core I/O Buttons There are two recessed buttons - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 130
Figure 5-8 Core I/O Button Locations OLR MP Reset 130 Server Troubleshooting - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 131
power on Slot available, slot power off Ready for OL*, slot power off Fault detected, slot power off Slot powering down or up Power (Green) On On On Off Off Off Flashing Disk Drive LEDs There are two tri-color LED on each disk drive. Attention (Yellow) Off Flashing On Off Flashing On Off Server - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 132
Hardware Overview Server management for the server is provided by an MP on the core I/O board. The server management hardware is powered by standby power that is available whenever the server is plugged into primary AC power. This allows service access even if the DC power to the server is switched - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 133
groups: • Chassis management • Chassis logging • Console and session redirection • Service access Chassis Management Chassis management consists of control and sensing the state of the server subsystems: • Control and sensing of bulk power • Control and sensing of DC-to-DC converters • Control and - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 134
firmware. Fan Control There are three sets of fans in the system: those on the I/O bay, the front and rear fans that are connected to the main backplane, and those on the cell boards. The front fans are run off of standby power, and will be running any time AC input power is supplied to the server - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 135
downloading and updating firmware using FM, see the HP Firmware Manager User's Guide at http://www.docs.hp.com/en/hw.html#System%20Firmware. Using FTP to Update Firmware The following section contains instructions for using FTP to update firmware. • The user logs into the server console through the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 136
Y to the confirmation request, the firmware update makes the connection to the FTP server at the IP address given using the user and password details supplied. The appropriate files will be downloaded and burned into the selected Flash memories. Note that the firmware update validates the image to - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 137
Figure 5-12 Server Cabinet CRUs (Front View) I/O Fan 3 I/O Fan 4 I/O Fan 5 Fan 0 Fan 1 I/O Fan 0 I/O Fan 1 I/O Fan 2 Cell Board 1 Cell Board 0 PDC Code CRU Reporting 137 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 138
must be locked for the cell board to power up and function properly. Power to the cell board should only be removed using the MP:CM>PE command or by shutting down the partition or server. Therefore, if the levers the "ready bit" is false. Refer to Table 5-10 for details. 138 Server Troubleshooting - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 139
letters) All cell VRMs are installed and both cell latches are locked. "rdy" (denoted by lower case letters) One or more VRMs are not installed or failed and/or one or more cell latches are not locked. Figure 5-14 de Command Output Ready Bit (RDY) is set to true Verifying Cell Board Insertion 139 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 140
140 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 141
and Powering On the Server" (page 142) and Chapter 4 "Operating System Boot and Shutdown" for complete instructions. Procedures for these CRUs include: • Removing and Replacing a Half-Height DVD/DAT Drive • Removing and Replacing PCA Front Panel Board • Removing and Replacing a PCI-X Power Supply - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 142
shielded cables. • Install and route the cables according to the instructions provided. • Ensure that all cable connector screws are firmly tightened. • Use only HP supported peripheral devices. • Ensure that all panels and cover plates are in place and secure before system operation. Electrostatic - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 143
MP Command Menu PE command to power on the hardware component that was powered off and replaced. 3. Use the PS command to verify that power is enabled to the newly replaced part. For example: Enter Cfrom within the PS command to select cell. If power is absent from the part, enter the PE command and - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 144
and Replacing the Top Cover It is necessary to remove and replace one or more of the covers to access the components within the server chassis. CAUTION: Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD safety precautions could result in damage to the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 145
seat the cover to avoid damage to the intrusion switch. 2. Slide the cover into position using a slow firm pressure to properly seat the cover. 3. Tighten the retaining screws to secure the components within the server chassis. Figure 6-3 Side Cover Locations Removing and Replacing a Side Cover 145 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 146
rotate outward and remove from chassis. Figure 6-5 Side Cover Removal Detail Replacing a Side Cover 1. Slide the cover in position. 2. The cover easily slides into position. Use a slow firm pressure to properly seat the cover. 146 Removing and Replacing Components - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 147
both sides of the bezel and push toward the server. The catches will secure the bezel to the chassis. Removing and Replacing PCA Front Panel Board The front panel board is located in the front of the chassis. All system power must be removed before attempting to remove or replace this component - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 148
Figure 6-7 Front Panel Assembly Location Front Panel Board Removing the PCA Front Panel Board 1. Remove the front bezel and the top and left side covers. 2. Follow proper procedures to power off the server. 3. Disconnect the SCSI cables from MSBP and move them out of the way. This helps provide - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 149
server. 2. Insert the left side of the board into the slot first; the right side of the board is angled toward the rear of the chassis. Insert the right side of the board. Ensure that the power panel cable to the system backplane. 8. Attach the DVD power cable. 9. Attach the SCSI cables to the MSBP. - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 150
Figure 6-9 Front Panel Board Cable Location on Backplane Front Panel Board Connector System Backplane Removing and Replacing a Front Smart Fan Assembly The Front Smart Fan Assembly is located in the front of the chassis. The fan - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 151
attempting this procedure. Failure to follow ESD safety precautions could result in damage to the server. Figure 6-10 Front Smart Fan Assembly Locations Fan 0 LED LED Fan 1 Table Off Fan is not installed or no power is applied to fan Removing and Replacing a Front Smart Fan Assembly 151 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 152
away from the connector. 4. Pull the fan away from the chassis. Replacing a Front Smart Fan Assembly 1. Position the fan assembly on the chassis fan guide pins. 2. Slide the fan into the connector. 3. Verify that the fan release pin is in the locked position. 4. Replace the front bezel. NOTE: The - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 153
attempting this procedure. Failure to follow ESD safety precautions could result in damage to the server. Figure 6-12 Rear Smart Fan Assembly Locations LED Fan 2 Fan 3 LED Table 6-2 Off Fan is not installed or no power is applied to fan Removing and Replacing a Rear Smart Fan Assembly 153 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 154
Rear Smart Fan Assembly 1. Carefully position the fan assembly on the chassis fan guide pins. 2. Slide the fan into the connector. 3. Verify that the fan the boot disk is not mirrored. Refer to "Powering Off Hardware Components and Powering On the Server" (page 142) for more information. The - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 155
CAUTION: Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD safety precautions could result in damage to the server. Figure 6-14 Disk Drive Location Removing a Disk Drive Figure 6-15 Disk Drive Detail Removing and Replacing a Disk Drive 155 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 156
disk drive in the chassis. 4. Slide the disk drive into the chassis. Use a slow firm pressure to properly seat the connection. 5. Depress the front power to this component must be removed before attempting to remove or replace it. Refer to "Powering Off Hardware Components and Powering On the Server - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 157
CAUTION: Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD safety precautions could result in damage to the server. Figure 6-16 DVD/DAT Location DVD/DAT Removing a DVD/DAT Drive 1. To remove the DVD/DAT, depress the front locking latch to loosen the drive - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 158
describes precise instructions for removable media cable measurement and orientation. Failure to comply will damage drive(s), data, and power cables. Use this section to configure and install a half-height DVD or DAT drive. Internal DVD and DAT Devices That Are Not Supported In HP Integrity rx7640 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 159
provides information on configuring the removable media drive bay cables for use with the half-height DVD or DAT drive. 1. Turn off power and remove the top cover. 2. If the cable configuration appears as shown in Figure 6-18 with one power cable and the Top DVD/DAT data cable, proceed with the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 160
media cover over the SCSI data and power cable and fasten into place. CAUTION: Ensure the service length of the cables remains fixed orange lines and lay it in the server chassis. See Figure 6-20. Figure 6-20 SCSI and Power Cable Lengths Folded Bottom DVD Cable 12. Connect both removable media power - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 161
Connection and Routing Removable Media Power Cable Routed Through the Cable Clip on the Back of the DVD Drive. 5. Connect this procedure. Failure to follow ESD safety precautions could result in damage to the server. Figure 6-23 DVD Drive Location DVD Removing and Replacing a Slimline DVD Drive 161 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 162
attempting to remove or replace it. Refer to "Powering Off Hardware Components and Powering On the Server" (page 142) for more information. The carrier holds the server. Figure 6-24 Slimline DVD Carrier Location Carrier and Slimline DVD Removing a Slimline DVD Carrier To remove the carrier, use the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 163
DVD+RW Drives. The HP Integrity rx7640 server can be configured with two slimline DVD+RW drives. Installation of the slimline DVD+RW drives requires that two core IO card sets are installed in the server. When the slimline DVD+RW drives are installed, the top drive is associated with cell 1 and the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 164
Flag Indicator SCSI Cable Length Indicator 10. Carefully position the metal removable media cover over the SCSI data and power cables and fasten into place. CAUTION: Ensure the service length of the cables remains fixed as described in steps 7 and 8 when securing the removable media cover. Failure - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 165
SCSI connectors must be on the right and the power cables must be on the left when viewed from the front of the server for proper installation. See Figure 6-28. Cross the power cables under the SCSI cables in the top of the server before the cables are inserted into the drive bay Figure - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 166
perform an online replacement of a PCI/PCI-X card using SAM, for cards whose drivers support online add or replacement (OLAR). IMPORTANT: Some PCI/PCI-X I/O cards cannot be added or replaced online (while HP instructions for supported backplane slot locations. Previous versions of the 2-cell server - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 167
card set is installed, it must be installed in PCI-X IO Chassis 0, slot number 8. This slot is reserved for the second Core I/O LAN/SCSI card. CAUTION: When a LAN/SCSI PCI card is added to an HP Integrity rx7640 server as part of a core I/O set, it must not have an external SCSI device connected to - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 168
and a .txt file that will include instructions and information about updating the firmware images. Removing and Replacing a PCI Smart Fan Assembly The PCI Smart Fan Assembly is located at the front of the PCI cardcage, toward the middle top portion of the server. The fan assembly is a hot swappable - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 169
to follow ESD safety precautions could result in damage to the server. Figure 6-30 PCI Smart Fan Assembly Location PCI Smart Fans Table slow or fast for greater than six seconds Off Fan is not installed or no power is applied to fan Removing a PCI Smart Fan Assembly Figure 6-31 PCI Smart Fan - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 170
close to the chassis. It might be necessary to use a tool, such as a flatblade screwdriver, to power supply. Table 6-5 identifies the meaning of the PCI-X Power Supply LED state. 3. Connect to ground with a wrist strap and grounded mat. 4. Visually inspect the replacement part for proper number - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 171
Table 6-5 PCI-X Power Supply LEDs LED Power Driven By Each supply State On Green Fault Each supply Off Flash Red Off Removing a PCI-X Power Supply Figure 6-33 PCI Power Supply Detail Description All output voltages generated by the power supply are within limits. Power to entire system has - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 172
. Failure to follow ESD safety precautions could result in damage to the server. Figure 6-34 BPS Location Bulk Power Supplies IMPORTANT: When a BPS is pulled from the server and then immediately re-inserted, the server might report an overcurrent condition and shut down. Removing a BPS 1. Remove the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 173
Figure 6-35 Extraction Levers Levers 3. Slide the BPS forward using the extractions levers to remove it from the chassis. Figure 6-36 BPS Detail Removing and Replacing a Bulk Power Supply 173 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 174
(MP) Network Settings After removing and replacing the core I/O in the server, verify the MP LAN network settings, using the settings from the original (replaced) core I/O. To configure management processor network settings, use the MP Command menu's LC command. To list the current management - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 175
1. Connect to the server complex management processor and enter CM to access the Command menu. Use telnet to connect to the management processor, if possible. If a management processor is at its default configuration (including default network settings), connect to it using either of these methods - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 176
176 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 177
, using aggressive software applications designed specifically to work the system at maximum loads and power consumption. Table 7-2 provides calculations for the configurations shown in the table. Table 7-2 Typical Server Configurations for the HP 9000 rp7440 Server Cell Boards Qty 2 2 Memory Per - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 178
Table 7-2 Typical Server Configurations for the HP 9000 rp7440 Server (continued) Cell Boards Qty 2 1 Memory Per PCI Cards DVDs Cell Board (assumes 10 watts each) GBytes Qty Qty 8 8 2 8 8 1 Hard Disk Core I/O Bulk Power Typical Drives Supplies Power Qty Qty Qty 2 2 2 1 1 2 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 179
presents procedures for booting and shutting down HP-UX on cell-based HP 9000 servers. Standard HP-UX Booting Procedure 7-1 HP-UX Booting (BCH Menu) From the BCH Menu, use the BOOT command to boot the HP-UX OS. The BCH Menu is available only on HP 9000 servers. 1. Access the BCH Main Menu for the - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 180
stand/vmunix HP-UX processor Main Menu. To exit the management processor, enter X at the Main Menu. Single-User Mode HP-UX Booting This section describes how to boot HP-UX in single-user mode on cell-based HP 9000 servers. Procedure 7-2 Single-User Mode HP desired device by using the BOOT command - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 181
to the management processor Main Menu. To exit the management processor, enter X at the Main Menu. LVM-Maintenance Mode HP-UX Booting This section describes how to boot HP-UX in LVM-maintenance mode on cell-based HP 9000 servers. HP-UX for the HP Integrity rx7640 and HP 9000 rp7440 Servers 181 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 182
on the nPartition that you want to shut down. Log in to the management processor for the server and use the Console menu to access the system console. Accessing the console through the MP enables you to maintain console access to the system after HP-UX has shut down. 182 HP Integrity rp7440 Server - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 183
by issuing commands from the management processor Command Menu. System Verification The minimum firmware version supported at release of the HP 9000 rp7440 Server is rp8440 and rp7440 Firmware Version 1.0. After the system firmware is updated, use the management processor (MP) cm menu to verify - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 184
184 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 185
A Replaceable Parts Replaceable Parts This appendix contains the server CRU list. For a more updated list of part numbers, go to the HP Part Surfer web site at: http://www.partsurfer.hp.com. Table A-1 Server CRU Descriptions and Part Numbers CRU DESCRIPTION Replacement P/N POWER CORDS AND CABLES - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 186
Table A-1 Server CRU Descriptions and Part Numbers (continued) CRU DESCRIPTION Nameplate, rx7640 Box, DVD Filler (Carbon) Assy, Bezel, No NamePlate (Graphite) Assy, Front Panel -2108A A6912-00014 A7025-04001 AB312-2102A C2786-40002 Exchange P/N None None None None None 186 Replaceable Parts - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 187
server management commands. Table B-1 Service Commands Command BO DATE DF LOC MA PE PWRGRD RE RR RS SYSREV TC TE WHO Description Boot a partition Set the time and date Display CRU Information of an Entity Display and Set Locator LED status Return to Main Menu Power entities on or off Allows user - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 188
Config Commands (continued) CP DC DI ID IF IT LC LS PARPERM PD RL RU SA SNMP SO UPS XD Display partition cell assignments Reset parameters to default configuration Disconnect Remote or LAN console Change certain stable complex configuration profile fields Display network interface information - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 189
number of floor plan grid sheets to create a scaled version of the computer room floor plan. Figure C-1 illustrates the overall dimensions required for the server. Figure C-1 Server servicing. The service areas shown on the template drawings are lightly shaded. The equipment templates should be used - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 190
computer room doors, air-conditioning floor vents, utility outlets, and so on. NOTE: Attach a reduced copy of the completed floor plan to the site survey. HP installation specialists use this floor plan during equipment installation. Figure C-2 Server Cabinet Template 190 Templates - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 191
Figure C-3 Planning Grid Computer Room Layout Plan 191 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 192
Figure C-4 Planning Grid 192 Templates - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 193
136 ESD precautions ESD kit, part number, 142 F fans, 19 firmware update, 136 front panel, 23 front panel display, 76 FW, 187 G getty, 132 H HE, 187 high availability (HA), 132 hot-pluggable defined, 141 hot-swappable defined, 141 housekeeping power, 76 HP-UX, 132 rootcell, 83 HP-UX Installation, 83 - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 194
, 187 noise emission specifications, 40 null modem cable connectivity, 76 part number, 76 O operating environment, 38 P password MP, 77 PCI, 19 PCI backplane, 29, 34 PD, 187 PDC Processor Dependent Code, 83 PDH riser board, 25 194 Index PE, 187 Platform Dependent Code (PDC), 132 power, 143 applying - HP rp7440 | User Service Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 195
TE, 187 turbocoolers, 19 U update firmware, 136 V verifying system configuration, 84 W warranty, 43 web console, 132 WHO, 187 wrist strap, 142 X XD, 187 195
HP Integrity rx7640 and HP 9000 rp7440
Servers
User Service Guide
HP Part Number: AB312-9010A
Published: November 2007
Edition: Fourth Edition