HP st5747 Troubleshooting Guide: HP t5740/t5745 Thin Clients and HP st5742/st5 - Page 14
Removing the Stand, Serial Number Location,
View all HP st5747 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Removing the Stand To remove the stand: 1. Turn unit upside down. 2. Press the tab (1), and then slide the stand about 1.26 cm (1/2 inch) toward the front of the unit and lift the stand off the unit (2). Figure 1-8 Removing the stand Serial Number Location Every thin client includes a unique serial number located as shown in the following illustration. Have this number available when contacting HP customer service for assistance. Figure 1-9 Serial number location 6 Chapter 1 Product Description
Removing the Stand
To remove the stand:
1.
Turn unit upside down.
2.
Press the tab (1), and then slide the stand about 1.26 cm (1/2 inch) toward the front of the unit
and lift the stand off the unit (2).
Figure 1-8
Removing the stand
Serial Number Location
Every thin client includes a unique serial number located as shown in the following illustration. Have
this number available when contacting HP customer service for assistance.
Figure 1-9
Serial number location
6
Chapter 1
Product Description