HP st5747 Troubleshooting Guide: HP t5740/t5745 Thin Clients and HP st5742/st5 - Page 34

Table 4-4 Setup Utility-Advanced BIOS Features (continued) 3rd Boot Device Select Boot Device Priority. Default is Network. Boot Up Numlock Status Select power on state for Numlock. Default is Off. Security Option Select whether the Password is required every time the system boots or only when you enter Setup. Default is Setup. POST Delay (secs) Set a delay that is added to POST to allow more time to press F10 to enter the Setup Utility. Default is None. F12 Boot Enable/Disable F12 network boot. Default is Enabled. Setup Utility-Integrated Peripherals Table 4-5 Setup Utility-Integrated Peripherals Option Description Integrated Audio Enable or Disable Onboard AC97 Audio controller. Default is Enabled. Network Controller Enable or Disable Onboard LAN device. Default is enabled. WLAN Controller Enable or Disable wireless LAN device. Default is enabled. USB Controller Enable or Disable USB controller. Default is enabled. Advanced USB Options Enable or Disable Secure USB and/or external ports. Default is enabled. USB Keyboard Support Allows use of USB keyboard under DOS. Default is enabled. USB Mouse Support Allows use of USB Mouse under DOS. Default is disabled. Serial Port 1 Select serial port base IO port address and IRQ. Default is 3F8/IRQ4. Serial Port 2 Select serial port base IO port address and IRQ. Default is 2F8/IRQ3. Parallel Port Select parallel port base IO port address and IRQ. Default is 378/IRQ7. Parallel Mode Select parallel port transfer mode of Standard, EPP, ECP, or ECP/EPP. Default is ECP/EPP. ECP Mode Use DMA Select DMA channel of 1 or 3 if parallel is operated in ECP mode. Default is 3. 26 Chapter 4 BIOS Settings, (F10) Utility