HP t628 t628 Thin Client - Page 13

An optional Quick Release mounting bracket is available from HP for mounting the thin client to

Get HP t628 PDF manuals and user guides View all HP t628 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

● To use the thin client in the horizontal orientation: a. Position the thin client right-side up and locate the two screw holes in the grid. b. Position the stand over the thin client and line up the captive screws in the stand with the screw holes in the thin client. c. Tighten the captive screws securely. 7. Reconnect external devices, reconnect the power cord, and then turn the thin client on. NOTE: Be sure that at least 10.2 centimeters (4 inches) of space on all sides of the thin client remain clear and free of obstructions. 8. Lock any security devices that were disengaged when the thin client cover or access panel was removed. NOTE: An optional Quick Release mounting bracket is available from HP for mounting the thin client to a wall, desk, or swing arm. When the mounting bracket is used, do not install the thin client with the I/O ports oriented towards the ground. Attaching the stand 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
●
To use the thin client in the horizontal orientation:
a.
Position the thin client right-side up and locate the two screw holes in the grid.
b.
Position the stand over the thin client and line up the captive screws in the stand with the
screw holes in the thin client.
c.
Tighten the captive screws securely.
7.
Reconnect external devices, reconnect the power cord, and then turn the thin client on.
NOTE:
Be sure that at least 10.2 centimeters (4 inches) of space on all sides of the thin client remain
clear and free of obstructions.
8.
Lock any security devices that were disengaged when the thin client cover or access panel was removed.
NOTE:
An optional Quick Release mounting bracket is available from HP for mounting the thin client to a
wall, desk, or swing arm. When the mounting bracket is used, do not install the thin client with the I/O ports
oriented towards the ground.
Attaching the stand
7