Hitachi 32PD7800 Owners Guide - Page 14

Connecting to an Audio Visual Device, INSTALLATION INSTRUCTIONS continued

Get Hitachi 32PD7800 PDF manuals and user guides View all Hitachi 32PD7800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

INSTALLATION INSTRUCTIONS (continued) Connecting to an Audio Visual Device (1) Make sure that the power switch of the monitor is turned off. (2) Make sure that the power switch of the imaging device is turned off. (3) Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this device and the signal output terminal of the imaging device. Speaker (R) Monitor (rear panel) Speaker (L) To component input terminals To component output terminals To audio output terminals Power cord To composite output terminal To audio output terminals To composite input terminals To audio input terminals To composite output terminals To audio output terminals To S video output terminal To audio output terminals To component To component input terminals output terminals Antenna Set-Top Box DVD Player VTR Side Input Photo input terminal (37/42 only) To USB output terminal To S, composite audio output terminal Headphone TV Type only DVD Player VTR VTR [An example of connecting audio visual devices] • If a component input terminal and a composite input terminal of AV1 and AV2 connect to the monitor at the same time, component input would govern. • If a video equipment with an S video output terminal is used, cabling by the S video cable is recommended to provide finer video quality. (If an S video input terminal and a video input terminal of AV3 or AV5 (side input) connect to the monitor at the same time, S video input would govern.) • If the OUTPUT (Monitor) terminal is connected to an external monitor with a 75 Ohm terminal, it is possible to view the same image as on the main unit. But it is possible to monitor only the composite video signal from AV1 ~ AV5 input or the S video signal from AV3 and AV5 that is displayed on the screen at the time. • The photo input function might not be provided, depending on a model. • Secure connecting cables to the stand with the provided clamp. HDMI* • HDMI (High-Definition Multimedia Interface) is a digital interface based on DVI (Digital Visual Interface), which is an added function for audio visual equipment. - It does not have degradation by transmission since it is digital. - With only one cable, it is possible to transmit both picture signals and audio signals. • In case of using analog audio as connecting with DVI-HDMI transformation connector, use an analog audio terminal for AV1 input. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
14
Connecting to an Audio Visual Device
(1) Make sure that the power switch of the monitor is turned off.
(2) Make sure that the power switch of the imaging device is turned off.
(3) Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this
device and the signal output terminal of the imaging device.
Monitor (rear panel)
Speaker (R)
Speaker (L)
Power
cord
Side Input
To component
output terminals
To component
output terminals
To S video
output terminal
To composite
output terminals
To audio
output terminals
To audio output
terminals
To audio output
terminals
To composite
output terminal
To audio output
terminals
To S, composite
audio output
terminal
To USB output
terminal
Headphone
To composite
input terminals
To audio input
terminals
Set-Top Box
Antenna
VTR
VTR
VTR
DVD Player
DVD Player
To component
input terminals
To component
input terminals
TV Type only
Photo input terminal
(37/42 only)
• If a component input terminal and a composite input terminal of AV1 and AV2 connect to the monitor at the same time, component input would
govern.
• If a video equipment with an S video output terminal is used, cabling by the S video cable is recommended to provide finer video quality.
(If an S video input terminal and a video input terminal of AV3 or AV5 (side input) connect to the monitor at the same time, S video input would
govern.)
• If the OUTPUT (Monitor) terminal is connected to an external monitor with a 75 Ohm terminal, it is possible to view the same image as on the
main unit. But it is possible to monitor only the composite video signal from AV1 ~ AV5 input or the S video signal from AV3 and AV5 that is
displayed on the screen at the time.
• The photo input function might not be provided, depending on a model.
• Secure connecting cables to the stand with the provided clamp.
HDMI*
• HDMI (High-Definition Multimedia Interface) is a digital interface based on DVI (Digital Visual Interface), which is an added function for audio
visual equipment.
– It does not have degradation by transmission since it is digital.
– With only one cable, it is possible to transmit both picture signals and audio signals.
• In case of using analog audio as connecting with DVI-HDMI transformation connector, use an analog audio terminal for AV1 input.
[An example of connecting audio visual devices]
INSTALLATION INSTRUCTIONS (continued)