Hitachi DK23BA-20 Owners Manual - Page 8

6.3.2.8.12 SMART Read Log Sector [B0h, Sub D5h] 65 6.3.2.8.13 SMART Write Log Sector [B0h, Sub D6h] 71 6.3.2.9 Security Mode Feature 72 6.3.2.9.1 Security Mode Default Setting 72 6.3.2.9.2 Initial Setting of the User Password 73 6.3.2.9.3 Security Mode Operation from Power-on or Hardware Reset 73 6.3.2.9.4 User Password Lost 74 6.3.2.9.5 Security Set Password [F1h] 75 6.3.2.9.6 Security Unlock [F2h] 76 6.3.2.9.7 Security Erase Prepare [F3h] 77 6.3.2.9.8 Security Erase Unit [F4h] 77 6.3.2.9.9 Security Freeze Lock [F5h] 78 6.3.2.9.10 Security Disable Password [F6h] 78 6.3.2.9.11 Security Mode Command Action [F1h] 79 6.3.2.10 Protected Area Feature, Address Offset Feature 80 6.3.2.10.1 Protected Area Feature and Set Max Security Extension 80 6.3.2.10.2 Address Offset Feature 81 6.3.2.10.3 Read Max Address Command [F8h] 83 6.3.2.10.4 Set Max Address Command [F9h, Sub 00h] 84 6.3.2.10.5 Set Max Set Password Command [F9h, Sub 01h] 86 6.3.2.10.6 Set Max Lock Command [F9h, Sub 02h] 86 6.3.2.10.7 Set Max Unlock Command [F9h, Sub 03h] 87 6.3.2.10.8 Set Max Freeze Lock Command [F9h, Sub 04h] 87 6.3.2.11 Device Configuration Overlay Feature 88 6.3.2.11.1 Device Configuration Restore [B1h, Sub 00h] 89 6.3.2.11.2 Device Configuration Freeze Lock [B1h, Sub 01h] 89 6.3.2.11.3 Device Configuration Identify [B1h, Sub 02h] 90 6.3.2.11.4 Device Configuration Set [B1h, Sub 03h] 92 6.3.2.12 Note for Write Cache and Auto Reallocation 96 6.4 Interface Signal Timing 97 6.4.1 Data Transfer Timing 97 6.4.2 Ultra DMA Data Transfer Timing 100 6.4.3 Power On and Hardware Reset Timing 110 < Glossary > 111 < Reference > 112 K6610007 Rev.5 02.14.'03 - 8 -