Hitachi DK23BA-20 Owners Manual - Page 91
condition. If no DEVICE CONFIGURATION SET command
View all Hitachi DK23BA-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Word 3 - 6 7 8 - 254 255 Table 6.18 Device Configuration Identify Data Structure (continued) Description Value (HEX.) Maximum LBA Address DK23FB-60: 6FC 7C7Fh Words 4 - 7 define the maximum LBA address. This is the DK23FB-40: 4A8 52FFh highest address accepted by the device in the factory default DK23FB-20: 254 297Fh condition. If no DEVICE CONFIGURATION SET command has been executed modifying the factory default condition, this is the same value as that returned by a READ NATIVE MAX ADDRESS command. Command Set / Feature Set Supported 008Fh bit 15 - 9 0 = Reserved bit 8 1= 48-bit Addressing feature set supported bit 7 1 = Host Protected Area feature set supported bit 6 1 = Automatic acoustic management supported bit 5 1 = R/W DMA QUEUED commands supported bit 4 1 = Power-up in Standby feature set supported bit 3 1 = Security feature set supported bit 2 1 = SMART error log supported bit 1 1 = SMART self-test supported bit 0 1 = SMART feature set supported Reserved 0000h Integrity word xxA5h bit 15 - 8 Checksum The checksum is the two's complement of the sum of all byte in words 0 through 254 and the byte consisting of bits 7:0 of word 255. Each byte is added with unsigned arithmetic, and overflow is ignored. The sum of all bytes is zero when the checksum is correct. bit 7 - 0 Signature Code "A5h" K6610007 Rev.5 02.14.'03 - 91 -