Hitachi DK23FB-60 Owners Manual - Page 34
Alternate Status Register, 3.1.12 Device Control Register
UPC - 706569123807
View all Hitachi DK23FB-60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
6.3.1.11 Alternate Status Register The information in this register is a duplicate of that in the Status Register. Reading this register will not clear the interrupt. 6.3.1.12 Device Control Register This register includes the software reset bit and the interrupt enable bit. Bit 7 6 5 4 3 2 1 0 Name - - - - - SRST nIEN '0' a) nIEN(Interrupt Enable): If the device is selected when nIEN is 0, the INTRQ signal is enabled. When nIEN is 1 or when the device is not selected, the INTRQ signal is in a high impedance state. b) SRST (Software Reset): When this bit is set, the device is reset. When this bit is cleared, the device exits from the reset state. When two devices are connected through one line in the daisy chain mode, they are reset simultaneously. K6610007 Rev.5 02.14.'03 - 34 -