Hitachi DK23FB-60 Owners Manual - Page 59
SMART Return Status [B0h, Sub DAh], 3.2.8.8 SMART Enable/Disable Attribute AUTOSAVE [B0h,
UPC - 706569123807
View all Hitachi DK23FB-60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
6.3.2.8.7 SMART Return Status [B0h, Sub DAh] Task File Registers Command Cylinder High Cylinder Low Device/Head Sector Number Sector Count Features DRV : Device selection bit 7 6 5 4 3 2 1 0 B0h C2h 4Fh - X - DRV XX XX XX DAh 0 : DRV0 1:DRV1 The SMART Return Status command is used to communicate the reliability status of the device to the host at the host's request. Upon receipt of this command the device sets BSY, saves any updated attribute values to non-volatile memory, and compares the updated attribute values to the attribute thresholds. If the device has not detected a threshold exceeded condition, the device sets the Cylinder Low register to 4Fh and the Cylinder High register to C2h. If the device has detected a threshold exceeded condition, the device sets the Cylinder Low register to F4h and the Cylinder High register to 2Ch. If SMART is disabled or if the values in the Features, Cylinder Low, or Cylinder High registers are invalid, an Aborted command error is posted. 6.3.2.8.8 SMART Enable/Disable Attribute AUTOSAVE [B0h, Sub D2h] Task File Registers Command Cylinder High Cylinder Low Device/Head Sector Number Sector Count Features DRV : Device selection bit 7 6 5 4 3 2 1 0 B0h C2h 4Fh - X - DRV XX XX 00h : Disable F1h : Enable D2h 0 : DRV0 1:DRV1 The SMART Enable/Disable Attribute AUTOSAVE command enables and disables the attribute auto save feature of the device. K6610007 Rev.5 02.14.'03 - 59 -