Hitachi DK23FB-60 Owners Manual - Page 58
SMART Disable Operations [B0h, Sub D9h]
UPC - 706569123807
View all Hitachi DK23FB-60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
The SMART Enable Operations command enables access to all SMART capabilities within the device. Prior to receipt of this command attribute values are neither monitored nor saved by the device. The device will preserve the state of SMART (either enabled or disabled) across power cycles. Once enabled, the receipt of subsequent SMART Enable Operations commands shall not affect any of the attribute values. If the values in the Features, Cylinder Low, or Cylinder High registers are invalid, an Aborted command error is posted. Upon receipt of this command from the host, the device sets BSY, enables SMART capabilities and functions, clears BSY, and asserts INTRQ. 6.3.2.8.6 SMART Disable Operations [B0h, Sub D9h] Task File Registers Command Cylinder High Cylinder Low Device/Head Sector Number Sector Count Features DRV : Device selection bit 7 6 5 4 3 2 1 0 B0h C2h 4Fh - X - DRV XX XX XX D9h 0 : DRV0 1:DRV1 The SMART Disable Operations command disables all SMART capabilities within the device including any and all timer functions related exclusively to this feature. After receipt of this command the device will disable all SMART operations. Attribute values will no longer be monitored or saved by the device. The device will preserve the state of SMART (either enabled or disabled) across power cycles. If SMART is not enabled, or if the values in the Features, Cylinder Low or Cylinder High registers are invalid, an Aborted command error is posted. Upon receipt of the SMART Disable Operations command from the host, the device sets BSY, disables SMART capabilities and functions, clears BSY, and asserts INTRQ. After receipt of this command by the device, all other SMART commands, with the exception of SMART Enable Operations, are disabled and invalid and shall be aborted by the device (including SMART Disable Operations commands), returning the Aborted command error. K6610007 Rev.5 02.14.'03 - 58 -