Hitachi DV-PF2U Owners Guide - Page 26
Playing A Disc
View all Hitachi DV-PF2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
AUTO REWIND REAL TIME TAPE COUNTER When a tape reaches the end during recording, play- ¡This shows the elapsed recording or playback time back, or fast-forward, the tape will automatically in hours, minutes, and seconds. (The displayed time rewind to the beginning. After rewinding finishes, the DVD/VCR will eject the tape and switch itself off. ¡The DVD/VCR will not rewind the tape automatically during timer recording or One Touch will not change during blank portions of the tape.) ¡The indication will appear when the tape is rewound further than "0:00:00" on the tape counter. Recording. PLAYING A DISC PLAYING A DVD VIDEO OR AN AUDIO CD DVD CD Getting started Turn on the power of the TV, amplifier and any other components which are connected to the DVD/VCR. (Change the input system to suit the DVD/VCR, and check that the sound volume is correct.) 1 Press the POWER/STANDBY Button. ¡The power will turn on. Check that the DVD OUTPUT Light is lit. If not press the DVD Button on the remote control to switch to DVD/VCR mode. 2 Press the OPEN/CLOSE Button. ¡The disc loading tray will open. 3 Place a disc into the tray. ¡Make sure the disc is sitting properly in the correct recess, with the label side up. Notes ¡While the setup menu is shown you can not open or close the tray. ¡A "prohibited icon" may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD/VCR or the disc. ¡If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback. ¡With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles. ¡During the playback of two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. USING THE DVD MENUS DVD 4 Press the PLAY Button. ¡The tray will close automatically, and playback will then start from the first chapter or the first track of the disc. With some discs, if the tray has been closed by pressing the OPEN/CLOSE Button, You need to press the PLAY Button to start the disc. ¡When you playback the DVD which a title menu is recorded, it may appear on the screen. In this case, refer to "USING THE DVD MENUS" or "USING THE TITLE MENU". Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings. 1 Press the MENU Button. ¡The DVD menu will appear. 2 Select the desired title. ¡Press the arrow Buttons (L/K/B/s) to change the setting, and then press the ENTER Button. 3 Playback will start from the selected title. 5 Press the STOP Button to stop play. - 26 - EN 2C15