Hitachi DV-PF2U Owners Guide - Page 33
Settings
View all Hitachi DV-PF2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
English ¡Press the K Button to go back to the upper hierar- chy. ¡If the entire program cannot be displayed at once on the screen, "L" appears to go to the next page. 3 When the disc has been programmed, press the PLAY Button. ¡Programmed play starts. Notes ¡Press the CLEAR/C. RESET Button, and the lastprogrammed entry will be deleted. ¡Press the RETURN Button, and the STOP screen will show up with the program contents in memory. ¡The program setting will be cancelled when the power is turned off or the disc tray is opened. ¡Program will be cleared when you turn the power off. TO CLEAR THE PROGRAM ¡Press the STOP Button twice, and the program will be cleared. SETTINGS CHANGING THE AUDIO LANGUAGE OR SOUND MODE DVD CD For audio CDs Press the AUDIO Button during playback. ¡Pressing the AUDIO Button cycles the sound mode through STEREO, L-CH and R-CH. The DVD/VCR has a function which allows you to select the desired audio language and sound mode. AUDIO STEREO Both right and left channels are active (stereo). For DVDs Press the AUDIO Button during playback, and then press the AUDIO Button to select the desired audio language. ¡The audio language can be changed if multiple languages are recorded on the DVD being played. AUDIO L-CH AUDIO R-CH Only the left channel is active. Only the right channel is active. AUDIO 1.ENG DolbyD 5.1CH AUDIO 2.FRE DolbyD 5.1CH Notes ¡Pressing the Audio Button may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language setting on the disc menu). Operation varies between discs, so refer to the manual accompanying the disc. ¡Current audio language and sound mode will be displayed when you press the AUDIO Button at first. AUDIO 3.JPN DolbyD 5.1CH HELLO Bon jour Note ¡For some Audio language, three dashes (---) may appear instead of a three-letter abbreviation for the language (ENG, FRE, etc.). ¡If a desired language is not shown after pressing the Audio Button several times, the disc does not have an audio source in that language. ¡The audio language resets to the one which has been selected in the setup mode, every time the power is turned on or discs are replaced. If that language is not available on a disc, a language defined by the disc is selected. ¡The screen display will disappear after about 5 seconds. ¡If you use DIGITAL AUDIO OUT jack, the sound mode of audio CDs can not be changed. - 33 - EN 2C15