Hitachi DV-RF7U Owners Guide - Page 63

Recording the current channel you are watching DVD-RAM DVD-RW DVD-R 4 Press the REC button. 5 Press the STOP button to stop or finish a recording in progress. • The message "Updating the information of disc. Please wait for a moment". 1. Check the antenna cable is connected. 2. Check the remaining time of disc. DVD-RAM/DVD-RW/DVD-R discs should be formatted in advance before beginning recording. Most new discs are sold unformatted. Make sure to format your unformatted discs before recording. Pausing / Resuming • Press the PAUSE button to pause a recording in progress. • Press the PAUSE button again during pause to resume recording. 1 Press the OPEN/CLOSE button and place a recordable disc on the disc tray. 2 Press the DVD CHANNEL 34 button to select the channel you want to record. 3 Press the REC MODE button on remote control, to select the recording speed (quality). • XP (High, approx. 1 hour) # SP (Standard, approx. 2 hours) # LP (Low, approx. 4 hours) # EP (Extended Play, approx 6 hours) RAM VR 3/3 XP CH111 I You can't change the recording mode and channel Note during recording. I Recording will stop automatically if there is not enough space for recording. I Up to 99 titles can be recorded onto a disc. I If the power is interrupted due to a power failure or other reasons, the title being recorded will not be saved onto the disc. I Recording will stop automatically if a copy protect- ed image is input. I Do not use DVD-R authoring discs with this unit. I To set a channel over 100, hold down the 100+ but- ton first: Example: CH 100 # 100+ 1 (extended pressing) + 0 +0 I Pressing the AUDIO button on remote control dur- ing MTS audio reception will switch the audio as follows: [MAIN] # [SAP] # [MONO] ^========} I The audio selected above will be recorded on disc. I If you change the sound setting while recording, the recorded sound will also change. Recording English - 63