Hitachi DV-RF7U Owners Guide - Page 69

Watching the Images Being Recorded (Time Slip) DVD-RAM This function allows you to watch the recently recorded 10-second images on the P in P screen while a recording is in progress. 1 During recording, press the TIME SLIP button on remote control. • The recently recorded 10-second images are played back on the P in P screen. • This function starts to operate 10 seconds from the time you press the REC button. • On the TIME SLIP screen, you can play back, scan, or perform other operations for the recorded program. Press the 6 button to scan the recording in the reverse order, from the end to the start. Press the 5 button to scan to the recently recorded 10- second images. Recording From External Devices Follow these directions to record onto a disc or a tape from External Devices. 1 Connect the Line out jack of your External Devices to the Line IN jack on the front or rear of your DVD Recorder-VCR using Audio/Video Cable. 2 Power on your DVD Recorder-VCR and switch to Line In mode by pressing the INPUT button on the remote. The front panel display changes on the following sequence .{-=Ch=an=ne=l N=um=be=r .=L=1 .=L= 2.=DV=B 3 When your DVD Recorder-VCR is in the stop state, set the operation mode of your External Devices to play mode. 4 Press the REC button on your DVD Recorder-VCR when the image from which you want to start recording is displayed. 2 Press the STOP button once to cancel the TIME SLIP function. • To stop a recording while a TIME SLIP function is in progress, press the STOP button twice. I The Time Slip function does not operate during a Note timer recording. I The Time Slip feature only works with DVD-RAM discs. I Pressing the P in P button will switch the images between the P in P and normal screens. 5 Press the STOP button on your DVD Recorder-VCR when the recording is finished. I Also refer to the user manual for your External Note Devices when recording through Line In mode using Audio/Video cable. Recording English - 69