Hitachi DZ-MV350A Owners Guide - Page 152
Disc has no Play List. - driver software
View all Hitachi DZ-MV350A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Message Cause & Troubleshooting Disc error. • Use another disc. • See *3 on page 155. • Mismatch in recording information may be caused by editing done on some device other than this DVD video camera/recorder. Initialize the disc or use another disc. • Initializing the disc will erase all data on it. "DISC ERROR" If you have write-protected a disc using the write-protect setting tool appears when an (WPTOOL) that is equipped with the UDF driver contained on the attempt to release write- CD-ROM provided with this DVD video camera/recorder, you protect is made. cannot release the write-protect on this DVD video camera/ recorder as is. Use the write-protect setting tool on PC to release the write-protect. Disc full. Cannot execute. Delete unnecessary scenes before using this disc, or use another disc. Disc has no data. This message will appear when the button is pressed with a disc inserted on which no still is recorded (It will appear if you attempt playback or editing on Disc Navigation, but will not appear if you press on camera through image.). Disc has no Play List. Switching of play list was selected with no play list stored. Disc includes protected The disc may be software protected from a device other than this scenes. Delete scenes? DVD video camera/recorder. To release this case, use a device that has executed software-protect. Disc is full. Cannot add control info. The number of entered scenes has reached the limit that can be entered, so the control information for generating thumbnails cannot be added. Combine several scenes or delete them. Disc is not formatted. Format the disc now? • Has the disc been initialized on a PC? Choose "YES" and initialize the disc when using it on this DVD video camera/recorder. Initialization will delete all data on the disc. • See *2 on page 155 DPOF is not set to a scene. This message will appear when "Slide Show: DPOF" is specified for the card to which DPOF was not set. DPOF scenes over limit. The maximum number of scenes for which DPOF can be set is 999. Cannot set DPOF scenes. Drive overheat. Please retry later. The temperature inside the DVD video camera/recorder is too high, and reading or writing of the data on disc may not be performed normally. Turn the DVD video camera/recorder off and wait for a while. The temperature will be effectively decreased if the DVD video camera/ recorder is placed in a well-ventilated spot. DVD-R Disc, Video mode cannot be changed. With DVD-R disc, the movie quality mode once used for recording cannot be changed. END OF DISC The disc is full. You cannot record on this disc anymore. Prepare another disc or delete unnecessary movie scenes from this disc. End scene cannot be Division is not possible at the end of scene. divided. Reference page 22, 76 127 101 118 101, 107 127 131 111 45 26 26 108 English 152