Hitachi DZ-MV350A Owners Guide - Page 43

REMOVING DISC 1 Set the power switch to "POWER OFF" to turn the DVD video camera/ recorder off. 2 Press down the DISC EJECT button once and release it. In a moment, the cover of disc insertion block will open slightly. DISC EJECT 3 Gently open the cover until it stops. Note: • It is recommended that you turn the DVD video camera/ recorder off when inserting or removing disc, in order to prevent faulty operation. • Even after the DVD video camera/recorder is turned on, the disc can be removed unless it is in recording status. Hold down the DISC EJECT button for approximately 2 seconds, and then release it to remove the disc. (The DISC EJECT indicator on the LCD screen will blink.) It is recommended that you turn the DVD video camera/ recorder off before inserting or removing disc to prevent misoperation. • Do not detach the battery or AC adapter/charger until the DVD video camera/recorder is completely turned off. • Do not insert anything other than the 8 cm DVD-RAM or DVD-R disc into the disc insertion block: Doing so could cause malfunctions. • Set the power switch to "POWER OFF" to turn the DVD video camera/recorder off. • When inserting or removing the disc, be careful not to touch the inside of DVD video camera/recorder (especially, the lens of laser pickup). • When inserting or removing the disc, connect a charged battery or AC adapter/charger to the DVD video camera/ recorder: The disc cover will not open unless the DVD video camera/recorder is powered. When the cover is fully open, the disc will slightly come out from the disc guide, and stop. 4 Remove the disc. Hold disc Hold the top around this of Round portion. DVD Holder as shown in the illustration and gently pull it out. Note: Be careful not to touch the disc exposed portion when removing the disc. 5 Gently push the section indicated "PUSH CLOSE" on the cover of disc insertion block, to close the cover. English 43