Hitachi NV83A2 Instruction Manual - Page 13
Loading Nails, Warning - coil nails for
UPC - 717709007260
View all Hitachi NV83A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
LOADING NAILS WARNING ⅷ When loading nails into Nailer, 1) do not pull trigger; 2) do not depress push lever; and 3) keep Nailer pointed downward. (1) Grip the nail guide and knob with finger. Press the knob down and swing the nail guide open. And open the magazine cover. Knob Nail guide Magazine cover (2) Adjust the position of the plate according to the nail length. The nail will not feed smoothly if the plate is not correctly adjusted. Magazine Magazine cover Nail holder English (3) Place the nail coil into the magazine. Uncoil enough nails to reach the driving hole. Nail holder Nails Magazine (4) 1 2 3 Uncoil enough nails to reach the driving hole. Insert the first nail into the driving hole and the second nail between the two pawls of the feeder. Fit the nail heads in the guide slot. Driving hole Guide slot First nail 2 3 Nail Guide 4 1 Guide surface 2 Feeder 4 Pulling the nails to the right, swing the nail guide closed. (5) Close the magazine cover first and swing the nail guide closed. (6) Lock the knob correctly. NOTE: Before loading nails in the magazine, adjust the plate. If the magazine cover is forcibly closed without adjusting the plate correctly, the nail holder may be damaged. 1 Turn the nail holder about 90 degrees counterclockwise. 2 Slide in vertical direction possible. Lift or lower the nail holder to accept different length nails. 3 Adjust the plate to the nail length reference points on the magazine cover and turn the nail holder 90 degrees clockwise until you hear "click". Knob Nail guide Magazine cover NOTE: Be careful not to deform the collated wires and not to disengage the nails with the guide surface. Otherwise, the nail guide will not close correctly. 2" 21/4" 23/8" 21/2" 23/4" 3" 31/4" Magazine 2 1 3 Nail holder - 13 -