Hitachi NV83A2 Instruction Manual - Page 9

English SPECIFICATIONS Model NV83A2 NV65AC NV50A1 Operating pressure 70 - 120 psi (4.9 - 8.3 bar 5 - 8.5 kgf/cm2) Dimensions 11-13/32" × 13-11/16" × 5-13/32" 11-13/32" × 12-17/32" × 5-13/32" 9-27/32" × 10-3/8" × 4-11/16" Length × Height × Width (290 mm × 348 mm × 135 mm) (290 mm × 318 mm × 135 mm) (250 mm × 264 mm × 119 mm) Weight 8.2 lbs (3.7 kg) 7.5 lbs (3.4 kg) 4.2 lbs (1.9 kg) Nail capacity 200 - 300 nails (1 coil) 250 - 300 nails (1 coil) 400 nails (1 coil) Air consumption .084 ft3/cycle at 100 psi (2.4 ltr/cycle at 6.9 bar) (2.4 ltr/cycle at 7 kgf/cm2) .075 ft3/cycle at 100 psi (2.1 ltr/cycle at 6.9 bar) (2.1 ltr/cycle at 7 kgf/cm2) .035 ft3/cycle at 100 psi (.99 ltr/cycle at 6.9 bar) (.99 ltr/cycle at 7 kgf/cm2) Air inlet 3/8 NPT Thread NAIL SELECTION Only nails shown in the Table below can be driven with this Nailer. NOTE: Use only genuine Hitachi nails to assure nail quality and driving ease. NV83A2 Min. Max. .236" (6 mm) .283" (7.2 mm) NV65AC Min. Max. .245" (6.2 mm) .266" (6.8 mm) NV50A1 Min. Max. .189" (4.8 mm) .189" (4.8 mm) 2" (50 mm) 3-1/4" (83 mm) 1-3/4" (45 mm) 2-1/2" (65 mm) 1-1/4" (32 mm) 2" (50 mm) .099" (2.5 mm) .131" (3.3 mm) . 090" (2.3 mm) .111" (2.8 mm) Dimensions of nails Nails are collated and coiled, as shown in the above figue. ACCESSORIES .083" (2.1 mm) .083" (2.1 mm) Wire-collated coil nails WARNING ⅷ Accessories other than those shown below can lead to malfunction and resulting injuries. STANDARD ACCESSORIES 1 Model 1 Eye protector 2 Allen wrench for M8 screw 3 Allen wrench for M6 screw 4 Allen wrench for M5 screw 5 Allen wrench for M4 screw 23 4 5 NV83A2 1 1 1 1 - 9 - NV65AC 1 1 1 1 NV50A1 1 1 1