Honeywell MS9535-5 Configuration Guide - Page 104
Activation Mode Features, Do Not Transmit a NO READ Message on Laser
View all Honeywell MS9535-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Activation Mode Features ³ 919600 ~ Variable Laser-On Time Out - Scan this bar code with a code byte sequence (on page 16-1) that represents the desired time out increment. The configurable time increment (1-second increments) selected is the scanning laser-on time. ³ 120314 Allow Full Laser-On Cycle - The laser stays on for a full cycle even when a bar code is scanned and transmitted. ³ 418324 ³ 118111 Blinky Mode - The laser turns on after the selected activation trigger is detected. The laser will blink on/off for approximately 30 seconds. Transmit a NO READ Message on Laser Time Out - If the scanning cycle terminates without scanning a bar code during the cycle, a NO READ message is transmitted with the termination of the scanning cycle. ³ 118101 Do Not Transmit a NO READ Message on Laser Time Out ³ 118311 ³ 118301 Activate the LED during the NO READ Transmission - The LED is output with the NO READ message. Deactivate LED during the NO READ Transmission ³ 119917 ³ 120303 Enable RTS No Read Pulse - A configurable RTS pulse width transmitted after the NO READ message has been transmitted. Disable RTS No Read Pulse 22-2