Honeywell MS9535-5 Configuration Guide - Page 68
Special Keyboard Features, Do Not Transmit FOH Break Code
View all Honeywell MS9535-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Special Keyboard Features ³ 116311 Transmit Make Code Only - Not available on all models. ³ 116301 * Transmit Make/Break Code - Not available on all models. ³ 116310 * Transmit FOH Break Code - The scanner will transmit the FOH in the break-code sequence. ³ 116300 ³ 116315 Do Not Transmit FOH Break Code Transmit Cleanup Bit - Use for certain NEC computers. ³ 116305 * Do Not Transmit Cleanup Bit ³ 116217 Enable Alt-Mode - See Enable ALT-Mode (Normal) for description. ³ 116207 * Disable Alt-Mode - Caution: If host software application uses the right Alt key as a "Hot" key, Alt-mode must be disabled. † These settings only apply if the Alt-Mode (shown above) is enabled. ³ 116706 * Enable Alt-Mode (Normal) † The scanner will duplicate the following keyboard sequence; Hold down the Alt key and Type the three digit decimal number that corresponds to the appropriate character. ³ 116716 Enable Alt-Mode (Advanced) † The scanner will duplicate the following keyboard sequence; Hold down the Alt key and Type the four digit decimal number that corresponds to the appropriate character. 11-4