Honeywell MS9535-5 Configuration Guide - Page 62
Software Handshaking, Enable 5 Retries on ACK/NAK Time Out
View all Honeywell MS9535-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
³ 115915 Enable RTS Counter Toggle - The scanner will toggle the RTS line on a good decode. ³ 115905 * Disable RTS Counter Toggle ³ 115914 ³ 115904 Enable XON/XOFF Handshaking - The scanner will stop transmission whenever on XOFF (ASCII 13H) is received. Transmission will resume after an XON (ASCII 11H) is received. * Disable XON/XOFF Handshaking. Software Handshaking ³ 115913 Enable ACK/NAK - After transmitting data, wait for an ACK (06H) or a NAK (15H) response from the host. If ACK is received, complete the communications cycle and look for more bar codes. If NAK is received, retransmit the last set of bar code data and wait for ACK/NAK again. ³ 115903 * Disable ACK/NAK ³ 115911 ³ 115901 Support BEL/CAN in ACK/NAK - When BEL (07H) is received, the scanner beeps 3 times and exits the communications loop. If a CAN (18H) is received, then the scanner will exit the communications loop, silently. * Ignore BEL/CAN in ACK/NAK - Ignore BEL/CAN characters in communication loop. ³ 118013 Enable 5 Retries on ACK/NAK Time Out - Allow up to 5 NAK retransmissions of the data before dropping out of the communications loop. ³ 118003 * Disable 5 Retries on ACK/NAK Time Out 10-4