Hoover U6485100 Manual - Page 11

Changing filter bag Disconnect cleaner from electrical outlet. ! CAUTION ! To reduce the risk of injury from moving parts, unplug vacuum before servicing. Do not operate cleaner without either the secondary or final filter in place. Removing Bag Door 3.1 To change filter bag, grasp top of bag door and pull door forward. Remove door. Removing and Installing Filter Bag 3.2 Grasp filter bag collar (A) and pull collar from tube (B). Note: Do not clean out old filter bag and reuse. Discard used filter bag. Hold new filter bag as shown. Align opening in filter bag with (B). Push (A) firmly onto (B). Tuck in filter bag. Replacing Bag Door 3.3 Reposition bag door by placing tab on bottom of door into opening (C). Press top of door to snap securely shut. 3.1 3.3 C 3.2 A B filters Secondary Filter ! CAUTION ! To reduce the risk of injury from moving parts, unplug vacuum before servicing. Do not operate cleaner without either the secondary or final filter in place. 3.4 The secondary filter (A), located behind the grill in the bottom of bag compartment, protects the motor from dirt particles. If filter becomes dirty, pull off grill and lift out filter. Hand wash filter in cold water with mild detergent, then air dry. Reposition dry filter and grill. 3.4 A What to Buy: Secondary Filter Additional filter is available at Hoover.com or call 1-800-944-9200. Use only genuine HOOVER® Secondary Filter with your vacuum. When purchasing a new Secondary Filter, ask for Hoover® Part No. 38765023. 11 Actual model may vary from images shown.