Hoover UH70600RM Product Manual - Page 6

2. HOW TO USE Vacuum Description 1. Handle** 2.1 1 2 2. ON/OFF Switch 3. Dirt Cup Release Button 4. Carry Handle 5. Dirt Cup 15 6. Stair Cleaning Handle 7. Headlight* 3 14 8. Height Adjustment 9. Furniture Guard 4 13 10. Brushroll On/Off Pedal* (Suction Only Mode) 5 11. Cord Rewind Pedal* 12. Filter made with HEPA media 16 18 17 and Carbon Filter* Access 13. Rinsable Filter Access 6 14. System Check Indicator 12 11 19 15. Air-Powered Hand Tool ** 16. Crevice Tool (inside wand) 7 10 17. Telescoping Wand 18. Hose 8 19. Handle Release Pedal 9 20. Hose Tube 21. Hose Release Button 22. Dusting/ Upholstery Tool** *Available on select models only **Varies per model 22 21 20 ON-OFF Switch 2.2 SUCTION ONLY MODE/ Brushroll shut-off for bare floors and very high pile carpet 2.3 2.3 For optimal cleaning performance on bare floors and carpet with pile deeper than 1", brushroll should be turned off. The vacuum is shipped with the brushroll in the ON A position. To turn brushroll OFF for Suction Only Mode, step on pedal (A). 2.2 Plug cord into electrical outlet. To turn vacuum ON, push ON/OFF switch once. To turn vacuum OFF, push switch again. IMPORTANT Pedal (A) is inactive when the cleaner is in the upright position. ! CAUTION ! Brushroll should be in off position for cleaning of high pile carpet deeper than 1". Cord Rewind AND STORAGE 2.4 To return cord for storage, unplug from wall. 2.4 Grasp the end of the plug and pull to release cord from cord reel until red tape is reached. To return cord for storage, hold plug and press down Cord Release Pedal (A) on side of cord reel. Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding. A IMPORTANT When pulling on the cord, yellow tape will identify when the cord is almost fully extended. When red tape is visible on the cord, the cord has reached its allowable extended length. Do not pull the cord out any further. Actual model may vary from images shown. 6