Hoveround MPV5 User Manual - Page 58

New VSI Controller, flash, flashes, flashes, flashes, flashes, flashes, flashes, flashes, flashes, - controller flashes

Page 58 highlights

Hoveround-MPV5ManualRevM 1/17/14 10:37 AM Page 58 New VSI Controller 1 flash: The battery needs charging or there is a bad connection to the battery. Try charging the battery. 2 flashes: The left hand motor has a bad connection. 3 flashes: The left hand motor has a short circuit to a battery connection. 4 flashes: The right hand motor has a bad connection. 5 flashes: The right hand motor has a short circuit to a battery connection. 7 flashes: A joystick fault is indicted. Make sure that the joystick is in the center position before switching on the controller. 8 flashes: A controller fault is indicated. 9 flashes: Problem with the brake circuit. Check that the manual release levers are in the drive position. 10 flashes: An excessive voltage has been applied to the controller. This is usually caused by a poor battery connection. Speed Bar Cycling: Controller locked. Speed Gauge Cycling: Check if battery charger is still connected to controller or controller fault. 58 Chapter 1 D82008753M 10/13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

58
Chapter 1
D82008753M
10/13
New VSI Controller
1 flash:
The battery needs charging or there is a bad
connection to the battery.
Try charging the battery.
2 flashes:
The left hand motor has a bad connection.
3 flashes:
The left hand motor has a short circuit to a
battery connection.
4 flashes:
The right hand motor has a bad connection.
5 flashes:
The right hand motor has a short circuit to a
battery connection.
7 flashes:
A joystick fault is indicted.
Make sure that the
joystick is in the center position before switching
on the controller.
8 flashes:
A controller fault is indicated.
9 flashes:
Problem with the brake circuit.
Check that the
manual release levers are in the drive position.
10 flashes:
An excessive voltage has been applied to the
controller. This is usually caused by a poor
battery connection.
Speed Bar Cycling:
Controller locked.
Speed Gauge Cycling:
Check if battery charger is still
connected to controller or controller fault.
Hoveround-MPV5ManualRevM
1/17/14
10:37 AM
Page 58