Huawei TalkBand B6 User Manual - Page 11

Getting Started Updating your band Method 1: Open the Huawei Health app, go to the device settings screen and touch Firmware update. The phone will search for any available updates. Follow the onscreen instructions to update your band. Method 2: • Android users: Open the Huawei Health app, go to the device settings screen and touch Firmware update, then touch update packages over Wi-Fi. in the top-right corner, and enable Auto-download • iOS users: Open the Huawei Health app, touch the profile image in the top-left corner, then touch Settings and enable Auto-download update packages over Wi-Fi. • Enable Auto-download update packages over Wi-Fi. When a new version is available, it will be automatically transferred to your band and an update notification will pop up. Follow the onscreen instructions to update your band. • During an update, your band will automatically disconnect from Bluetooth, but will reconnect once the update is complete. • Do not insert anything into the USB port or charge the band during the update. Viewing the Bluetooth name, MAC address, and Serial Number Viewing the Bluetooth name: • On your band, go to Settings > About. The name displayed under Device name is the device's Bluetooth name. • Alternatively, open the Huawei Health app and enter the device settings screen. The name of the connected device is the Bluetooth name. Viewing the MAC address: • On your band, go to Settings > About to view the MAC address. • Alternatively, take the earphone out from the base and view the back of the earphone. The 12 alphanumeric characters displayed after MAC: is your band's MAC address. Viewing the Serial Number (SN): On your band, go to Settings > About. Your band's Serial Number is displayed next to SN:. Resetting the band to factory settings Method 1: On the band, go to Settings > System > Reset. Please note that all your data will be cleared after the reset. 9