Huawei TalkBand B6 User Manual - Page 29

Health management • You can set the low heart rate value to 40 bpm, 45 bpm, or 50 bpm. • This feature is only available on Android phones. Measuring blood oxygen levels (SpO2) On your band, enter the app list, touch SpO2 and start a SpO2 measurement. When Retest is displayed on the screen, it indicates that the measurement is complete. • This function may not be supported in your country, please contact Huawei authorised service centre for further details. • The reading will be interrupted if you swipe right on the band screen, receive an incoming call, or an alarm goes off. • For a more accurate result, it is recommended that you wait three to five minutes after putting your band on to measure your SpO2. • Keep still and wear your band a little bit tightly during the measurement, but avoid it from coming into contact with the joint. Ensure that the heart rate sensor is in touch with the skin and there are no foreign objects between your skin and the band. Make sure the band screen is facing up. • During the measurement, the band will also measure your heart rate. • This measurement may also be affected by some external factors such as low ambient temperatures, arm movement, or if you have tattoos on your arm. • The measurement results are for reference only and are not intended for medical use. Testing stress levels Enable Automatic stress test: Open the Huawei Health app, go to the device settings screen, go to Health monitoring > Automatic stress test, then enable Automatic stress test. Viewing stress data: On your band, enter the app list and touch Stress to view your stress level and the percentages occupied by different stress levels. The automatic stress test feature is disabled during workouts. Using Breathing exercises 1 On your band, enter the app list and select Breathing exercises. You can set the duration and rhythm for your exercises. 2 Touch the icon to start the exercise. 27