Hunter 23298 Owner's Manual - Page 6

Step 3-2 Fan Assembly Step 3-3 Set Screw Step 3-5 3 • Assembling and Hanging the Fan Glass Uplight Downrod Canopy 3-1. Install three 25 Watt Candelabra bulbs. 3-2. Place the glass uplight onto the fan assembly. 3-3. Insert the downrod through the canopy, canopy trim ring, and glass uplight. Feed the wires from the fan through the downrod. CAUTION: The adapter has a special coating on the threads. Do not remove this coating; the coating prevents the downrod from unscrewing. Once assembled, do not remove the downrod. 3-4. Loosen the set screw. Screw the downrod into the fan assembly. Retighten the set screw. 3-5. Raise the fan and place the hook on the ceiling plate through the U-shaped hole in the rim of the canopy. WARNING: Fan may fall if not assembled as directed in these installation instructions. Canopy Trim Ring U-shaped Hole 6 41874-01 • 08/13/09 • Hunter Fan Company