Hunter 23298 Owner's Manual - Page 8

Step 5-2 Canopy Steps 5-4 - 5-5 5 • Installing the Canopy and Canopy Trim Ring Ceiling Plate Canopy Trim Ring 5-1. Holding the canopy, raise the fan off the hook. 5-2. Align the slots in the canopy with the tabs on the ceiling plate. 5-3. Raise the canopy over the ceiling plate. Rotate the canopy clockwise until the tabs on the ceiling plate totally engage with the slots in the canopy. 5-4. Loosely assemble the three canopy screws into the canopy one at a time. Once all three screws are in, tighten them. 5-5. Using both hands, push the canopy trim ring up to the top of the canopy. The canopy trim ring will snap and lock into place. Step 5-3 Should you need to remove the canopy trim ring, follow these steps: 1. Locate the tab indicators, small bumps on top of tabs. 2. Press firmly on opposite sides of the ring towards the canopy. The tabs will flex out releasing the trim ring from the canopy Canopy Screw 8 41874-01 • 08/13/09 • Hunter Fan Company