Hunter 23298 Owner's Manual - Page 7
All wiring must be in accordance with national and local electrical, codes and ANSI/NFPA 70. If
View all Hunter 23298 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. 4-1. Disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. 4-2. To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise until tight. CAUTION: Be sure no bare wire or wire strands are visible after making connections. 4-3. Connect the wires as follows: • The green or bare ground wire from the ceiling to the green ground wire from the ceiling plate and the green ground wire from the fan • The white (common) power wire from the ceiling to the white wire from the fan Step 4-3 • The black power wire from the ceiling to the black wire from the fan Wire Connector 4-4. Push all wires and wire connectors back through the ceiling plate hole into the outlet box. 7 41874-01 • 08/13/09 • Hunter Fan Company