Hunter 44110 Owner's Manual - Page 27
AM/PM and current hour will flash - flashing 2
View all Hunter 44110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
SETTINGS, CONT. The default for this thermostat setting is in a 12 hour format. You can change the format to 24 hour format by pressing D/T and then Program. The AM/PM indicator will be off when the thermostat is in 24 hour mode. Setting day and time: 1. Press D/T. (AM/PM and current hour will flash) 2. Press U or D to adjust the setting. 3. Press D/T again to adjust the minute setting. 4. Press D/T again to adjust the day of the week. 5. Press D/T to return to the normal display. You may also press Hold/Return at any time to return to the normal display. 25
25
The default for this thermostat setting is in a 12 hour
format. You can change the format to 24 hour format by
pressing
D/T
and then Program.
The AM/PM indicator will be off when the thermostat
is in 24 hour mode.
Setting day and time:
1. Press
D/T
. (AM/PM and current hour will flash)
2. Press
U
or
D
to adjust the setting.
3. Press
D/T
again to adjust the minute setting.
4. Press
D/T
again to adjust the day of the week.
5. Press
D/T
to return to the normal display.
You may also press Hold/Return at any time to return
to the normal display.
SETTINGS, CONT.