Husqvarna 129L Operation Manual - Page 11
Assembling the cutting, equipment, Fitting the trimmer guard and, trimmer head - 129lk
View all Husqvarna 129L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ASSEMBLY Assembling the cutting equipment WARNING! Never use a cutting ! attachment without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury. Fitting the trimmer guard and trimmer head (129L, 129LK) Fitting the trimmer guard and trimmer head (129C) • Fit the guard as shown in the diagram. Tighten securely. • Fit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the bolt (L). • Fit the dust cup on the shaft. The nut must be completely covered by the dust cup. • Fit the drive disc (B) on the output shaft. • Turn the output shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing. • Insert the locking pin (C) in the hole to lock the shaft. • Screw on the trimmer head/plastic blades (H) in the opposite direction to the direction of rotation. • Hold the dust cup with a spanner to prevent the shaft from rotating. • Screw the trimmer head onto the shaft. • To dismantle, follow the instructions in the reverse order. English - 11