Husqvarna 520iHD60 Owner Manual - Page 13
To examine the cutter blade
View all Husqvarna 520iHD60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Maintenance schedule WARNING: Remove the battery before you do maintenance. The following is a list of the maintenance steps that you must do on the product. Maintenance Clean the external parts of the product. Examine that the start and stop switch works correctly and is not damaged. Make sure that the power trigger and the power trigger lockout function correctly from a safety point of view. Make sure that all controls work and are not damaged. Make sure that the cutter blade and cutter guard have no cracks and that they are not damaged. Replace the cutter blade or the cutter guard if they have cracks or if they have been exposed to impact. Speak to your dealer to replace the cutter blade if it is bent or damaged. Make sure that the hand guard is not damaged. Replace the guard if it is damaged. Make sure that the screws and nuts are tight. Make sure that the battery is not damaged. Make sure that the battery is charged. Make sure that the battery charger is not damaged. Make sure that the screws that hold the cutter blades together are correctly tightened. Do a check of the connections between the battery and the product. Do a check of the connection between the battery and the battery charger. Before use X X X X X X X X X X X Weekly Monthly X X To examine the battery and the battery charger 1. Examine the battery for damages, for example cracks. 2. Examine the battery charger for damages, for example cracks. 3. Make sure that the connection cord of the battery charger is not damaged and that there are no cracks in it. To clean the product, the battery and the battery charger 1. Clean the product with a dry cloth after use. 2. Clean the battery and battery charger with a dry cloth. Keep the battery guide tracks clean. 3. Make sure that the terminals on the battery and the battery charger are clean before the battery is put in the battery charger or the product. To examine the cutter blade 1. Clean the cutter blades from unwanted materials with an anti corrosion cleaning agent before and after you use the product. 2. Examine the edges of the cutter blade for damages and deformation. 3. Use a file to remove burrs on the cutter blade. 4. Make sure that the cutter blades move freely. To lubricate the cutter blade 1. Lubricate the cutter blade bars with a recommended spray grease before long periods of storage. 773 - 004 - 19.08.2020 13