Husqvarna 520iHD60 Owner Manual - Page 8

Keypad on To start the product on,

Get Husqvarna 520iHD60 PDF manuals and user guides View all Husqvarna 520iHD60 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest servicing dealer. WARNING: Never use a product with defective safety components. The product's safety equipment must be inspected and maintained as described in this section. If your product fails any of these checks, contact your service agent to get it repaired. 2. Push the power trigger lockout up. CAUTION: All servicing and repair work on the machine requires special training. This is especially true of the machine′s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent. 3. Push the power trigger up and apply full power. To do a check of the keypad 1. Press and hold the start/stop button (1). 3 2 1 a) The product is switched on when the LED (2) is lit. b) The product is switched off when the LED (2) is out. 2. See Keypad on page 14 if the warning indicator (3) is lit or flashes. To do a check of the power trigger and power trigger lockout 1. Start the product, refer to To start the product on page 11. 4. Release the power trigger and make sure that the return spring operates correctly. The blade must stop in less than 1 second. 5. Stop the product. 6. Do step 1 and 2. 7. Release the power trigger lockout and make sure that the return spring of the power trigger lockout operates correctly. The blade must stop in less than 1 second. To do a check of the hand guard The hand guard prevents hands from accidental contact with the blades. 1. Stop the product. 2. Remove the battery. 3. Check that the hand guard is attached correctly. 4. Examine the hand guard for damages. To do a check of the blades and blade guards The outer edges of the blades (A) have the function of blade guards. 1. Stop the product. 2. Remove the battery. 3. Put on protective gloves. 8 773 - 004 - 19.08.2020

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest servicing dealer.
WARNING:
Never use a product with
defective safety components. The product's
safety equipment must be inspected and
maintained as described in this section. If
your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION:
All servicing and repair work on
the machine requires special training. This is
especially true of the machine′s safety
equipment. If your machine fails any of the
checks described below you must contact
your service agent. When you buy any of
our products we guarantee the availability of
professional repairs and service. If the
retailer who sells your machine is not a
servicing dealer, ask him for the address of
your nearest service agent.
To do a check of the keypad
1.
Press and hold the start/stop button (1).
1
2
3
a)
The product is switched on when the LED (2) is
lit.
b)
The product is switched off when the LED (2) is
out.
2.
See
Keypad on page 14
if the warning indicator (3)
is lit or flashes.
To do a check of the power trigger and power trigger
lockout
1.
Start the product, refer to
To start the product on
page 11
.
2.
Push the power trigger lockout up.
3.
Push the power trigger up and apply full power.
4.
Release the power trigger and make sure that the
return spring operates correctly. The blade must stop
in less than 1 second.
5.
Stop the product.
6.
Do step 1 and 2.
7.
Release the power trigger lockout and make sure
that the return spring of the power trigger lockout
operates correctly. The blade must stop in less than
1 second.
To do a check of the hand guard
The hand guard prevents hands from accidental contact
with the blades.
1.
Stop the product.
2.
Remove the battery.
3.
Check that the hand guard is attached correctly.
4.
Examine the hand guard for damages.
To do a check of the blades and blade guards
The outer edges of the blades (A) have the function of
blade guards.
1.
Stop the product.
2.
Remove the battery.
3.
Put on protective gloves.
8
773 - 004 - 19.08.2020