Husqvarna 525iLK Owner Manual - Page 10

To do a check of the cutting attachment guard, Trimmer head, Safety instructions for assembly

Get Husqvarna 525iLK PDF manuals and user guides View all Husqvarna 525iLK manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

B A C 1. Make sure that the power trigger is locked when the lock is in its original position. To do a check of the cutting attachment guard WARNING: Do not use a cutting attachment without an approved and correctly attached cutting attachment guard. Always use the recommended cutting attachment guard for the cutting attachment that you use, see Accessories on page 20. If an incorrect or faulty cutting attachment guard is attached this can cause serious personal injury. The cutting attachment guard stops objects that ejects in the direction of the operator. It also prevents injuries that occur if you touch the cutting attachment. 1. Stop the product and remove the battery. 2. Do a visual check for damages, for example cracks. 2. Push the power trigger lockout forward (A) and down. Hold the power trigger lockout against the handle (B) and make sure that it returns to its original position when you release it. B A 3. Make sure that the power trigger and the power trigger lockout moves freely and that the return springs operate properly. 4. Start the product, refer to To start the product on page 14. 5. Push the power trigger fully to apply full speed. 6. Release the power trigger and make sure that the cutting attachment stops and remains still. 3. Replace the cutting attachment guard if it is damaged. Trimmer head • Always use the correct trimmer head, cutting attachments and always use the recommended trimmer line. Refer to Accessories on page 20 and the assembly in the end of the Manual. • Make sure that the cutter on the trimmer guard is not damaged. • Make sure that the trimmer line is wound tightly and equally around the drum to prevent unusual vibrations from the product. Different cord lengths can result in vibrations that are not necessary. Tap the trimmer head to get correct length on the cord. To increase the life of the cord it can be soaked in water for 2 days or more before assembly. This will make the cord more resistant. Safety instructions for assembly WARNING: Read this power unit manual together with approved accessory manual. • Remove the battery from the product before you assemble the product. • Use approved protective gloves. • A defective or incorrect guard can cause injury. Do not use a cutting attachment that does not have an approved guard attached. 10 1938 - 003 - 24.02.2023

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
B
A
C
1.
Make sure that the power trigger is locked when the
lock is in its original position.
2.
Push the power trigger lockout forward (A) and
down. Hold the power trigger lockout against the
handle (B) and make sure that it returns to its
original position when you release it.
B
A
3.
Make sure that the power trigger and the power
trigger lockout moves freely and that the return
springs operate properly.
4.
Start the product, refer to
To start the product on
page 14
.
5.
Push the power trigger fully to apply full speed.
6.
Release the power trigger and make sure that the
cutting attachment stops and remains still.
To do a check of the cutting attachment guard
WARNING:
Do not use a cutting
attachment without an approved and
correctly attached cutting attachment guard.
Always use the recommended cutting
attachment guard for the cutting attachment
that you use, see
Accessories on page 20
.
If an incorrect or faulty cutting attachment
guard is attached this can cause serious
personal injury.
The cutting attachment guard stops objects that ejects in
the direction of the operator. It also prevents injuries that
occur if you touch the cutting attachment.
1.
Stop the product and remove the battery.
2.
Do a visual check for damages, for example cracks.
3.
Replace the cutting attachment guard if it is
damaged.
Trimmer head
•
Always use the correct trimmer head, cutting
attachments and always use the recommended
trimmer line. Refer to
Accessories on page 20
and
the assembly in the end of the Manual.
•
Make sure that the cutter on the trimmer guard is not
damaged.
•
Make sure that the trimmer line is wound tightly
and equally around the drum to prevent unusual
vibrations from the product. Different cord lengths
can result in vibrations that are not necessary. Tap
the trimmer head to get correct length on the cord.
To increase the life of the cord it can be soaked in water
for 2 days or more before assembly. This will make the
cord more resistant.
Safety instructions for assembly
WARNING:
Read this power unit
manual together with approved accessory
manual.
•
Remove the battery from the product before you
assemble the product.
•
Use approved protective gloves.
•
A defective or incorrect guard can cause injury. Do
not use a cutting attachment that does not have an
approved guard attached.
10
1938 - 003 - 24.02.2023