Husqvarna 525iLK Owner Manual - Page 9
Safety devices on the product, To do a check of the user interface
View all Husqvarna 525iLK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
• Use a protective helmet where there is a risk of falling objects. • Use approved hearing protection that provides adequate noise reduction. Long-term exposure to noise can result in permanent hearing impairment. • Use approved eye protection. If you use a visor, you must also use approved protective goggles. Approved protective goggles must comply with the ANSI Z87.1 standard in the USA or EN 166 in EU countries. • Use a visor for face protection. A visor is not enough for protection of the eyes. + • Use gloves when necessary, for example when you attach, examine or clean the cutting equipment. • Use sturdy non-slip boots. • Use clothing made of a strong fabric. Always use heavy, long pants and long sleeves. Do not use loose clothing that can catch on twigs and branches. Do not wear jewelry, short pants, sandals or go with bare feet. Put your hair up safely above shoulder level. WARNING: Never use a product with defective safety components. The product's safety equipment must be inspected and maintained as described in this section. If your product fails any of these checks, contact your service agent to get it repaired. CAUTION: All servicing and repair work on the machine requires special training. This is especially true of the machine′s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent. To do a check of the user interface 1. Press and hold the start/stop button (A). a) The product is on when the display (B) comes on. B A • Keep first aid equipment close at hand. Safety devices on the product WARNING: Read the warning instructions that follow before you use the product. In this section the product's safety features, its purpose and how checks and maintenance should be carried out to ensure that it operates correctly. See instructions under the heading Introduction on page 2 to find where these parts are located on your product. The life span of the product can be reduced and the risk of accidents can increase if product maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest servicing dealer. b) The product is off when the display goes off. 2. If the warning indicator on the display is on or flashes, refer to Troubleshooting on page 18. To do a check of the power trigger lockout The power trigger lockout is designed to prevent accidental operation. When you push the power trigger lockout forward (A) and then press the power trigger lockout against the handle (B), the power trigger (C) is released. When you release the handle, the power trigger and the power trigger lockout both move back to their original positions. This movement is operated by three independent springs. 1938 - 003 - 24.02.2023 9