Husqvarna 525iLK Owner Manual - Page 14
Work position, Before you operate the product, To start the product
View all Husqvarna 525iLK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2. Push the battery into the battery holder of the product. The battery locks into position when you hear a click. To start the product 1. Put the product in the start position. 2. Push and hold the start button until the green LED comes on. CAUTION: If the battery does not move easily into the battery holder, the battery is not installed correctly. This can cause damage to the product. 3. Make sure that the battery is installed correctly. Work position • Hold the product with 2 hands. • Hold the product on the right side of your body. • Keep the cutting attachment below waist level. • Keep body parts away from the hot surfaces. • Keep body parts away from the cutting attachment. Before you operate the product • Examine the work area to make sure that you know the type of terrain, the slope of the ground and if there are obstacles such as stones, branches and ditches. • Do an overhaul inspection of the product. • Do the safety inspections, maintenance and servicing that are given in this manual. • Make sure that all covers, guards, handles and the cutting equipment are correctly attached and not damaged. • Examine the trimmer head and cutting attachment guard for damages or cracks. Replace the trimmer head and cutting attachment guard if they have been hit or if they have cracks. 3. Use the power trigger to control the speed. To limit the maximum speed with the mode button The product has a mode button. Withe the mode button the operator can limit the maximum speed. The mode button has 3 speed levels. A lower level increases the time of operation for the product. The mode button has 3 speed levels. A lower level increases the time of operation for the product. Use level 1 and level 2 if the operation does not require full speed/full power. If the operation condition requires full speed/full power, use level 3. Do not use a higher level than necessary for the operation. 1. Push the mode button to set a limit to the maximum speed. The white LEDs comes on to show that the function is on. 2. Push the Mode button again to choose the next speed level. Automatic shutdown function The product has a shutdown function that stops the product if the product is not used. The green LED for 14 1938 - 003 - 24.02.2023