Husqvarna AUTOMOWER 220 AC Owners Manual - Page 35
Insert the end of guide 2 into the lower, left-hand hole on the charging station
View all Husqvarna AUTOMOWER 220 AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. INSTALLATION The longer the guide wire, the closer the mower follows the guide wire. If the guide wire is longer than 1000 ft, the mower may find it difficult to follow the wire. This varies depending on the design of the garden and installation. 2. Lift up the cover on the charging station. 3. If you intend to install guide 1: • Insert the end of guide 1 into the lower right-hand hole on the charging station and catch it in the upper hole. • Secure a connector on the guide wire. • Connect guide 1 to the contact pin on the charging station marked guide 1. If you intend to install guide 2: • Insert the end of guide 2 into the lower left-hand hole on the charging station and catch it in the upper hole. • Secure a connector on the guide wire. • Connect guide 2 to the contact pin on the charging station marked guide 2. 4. Route the cable straight under the charging station plate. 5. Route the guide wire at least 7 ft straight out from the front edge of the charging plate. 3012-650 3012-538 Maximum distance At least 12" 36 - English At least 7 ft 3012-834