Husqvarna AUTOMOWER 220 AC Owners Manual - Page 9
Presentation - batteri
View all Husqvarna AUTOMOWER 220 AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2. PRESENTATION 2. Presentation This chapter contains information you should be aware of when planning the installation. An installation of Husqvarna Automower™ includes four main components: Automower, an automatic lawn mower that mows the lawn by moving in essentially an irregular pattern. The mower is powered by a maintenance-free battery. Charging station, where your Automower returns when the charge level in the battery becomes too low. The charging station has three functions: • To send control signals along the boundary wire. • To send out signals so Automower finds the charging station. • To charge Automower battery. Transformer, which is connected between the charging station and a 120V wall socket. The transformer is connected to the wall socket via an integrated power cord and to the charging station via a 66 ft long low voltage cable. The low voltage cable must not be extended. Wire, laid in a loop around Automower's working area. The boundary wire is laid around the edges of the lawn and around objects and plants that the mower must not run into. The wire is also used for any guide wires. The wire supplied with the installation is 1300 ft long (800 ft for 220 AC). If this is not sufficient more wire can be purchased, with a connector, and spliced onto the existing wire. 3012-691 3012-509 3012-220 3012-221 10 - English